Tips & Tutorials

How to Install Samsung Galaxy Note 10+ 5G First Camera Improvement Update

Received your new Samsung Galaxy Note 10+ 5G? Here is how to install the first official software update on the new Note phone. This release carries improvements to Camera, touch responsiveness and more. Despite the phone being so new, there is already a software update released which tries to improve the performance even further and also, fixes any initial bugs that have risen while wider user testing. Just like older phones, Samsung Galaxy Note 10 Plus 5G can easily be manually updated with Odin. Keep in mind, this is an official firmware which has been published by Samsung.

Just like with all our guides, you need to first make a complete backup of your data. Once that is out of the way, you can then proceed with the installation steps. Our procedure will be utilizing Odin to flash the update. Don’t fret with warranty or Knox as installing an official update with Odin doesn’t trip any of that and your warranty will remain valid.

Install Note 10+ 5G Camera Update

Disclaimer: Please use this guide at your own risk. We, at TeamAndroid, would not be held responsible if you brick or generally mess up with your device. Further, the firmwares, system files or apps used are property of their respective owners.

First Official Firmware Update Details:

The firmware linked ahead is the first ever update arriving for Samsung’s Galaxy Note 10 Plus 5G. Carrying improvements to camera, touch responsiveness and more. Make sure to read the already covered detailed change-log right here.

This firmware tutorial applies to various Galaxy Note 10 Plus 5G variants. The specific model numbers supported through this guide are mentioned ahead.

  • Samsung Galaxy Note 10+ 5G N976B (UK Variant)
  • Samsung Galaxy Note 10+ 5G N976N (Korean Variant)

To make sure you own the correct Samsung Galaxy Note 10 Plus 5G model / variant, go to Settings > About phone > Model number.

You might find these following Galaxy Note 10 Plus 5G related articles interesting:

If you plan on rooting this phone or are still confused for why to root Galaxy Note 10 Plus 5G, read: Benefits of Rooting Your Android Device.

Samsung Galaxy Note 10 Plus 5G USB Drivers

You will need to connect your Android phone with the computer. For that, please make sure you have installed the USB drivers for Samsung Galaxy Note 10 Plus 5G properly. If not, you can download the latest official drivers from our Android USB Drivers section here:

Download Samsung Galaxy Note 10 Plus 5G USB drivers!

All set and ready? Good. You can now continue reading below and update Galaxy Note 10 Plus 5G to Android Pie official firmware update.

How to Install Android Pie on Galaxy Note 10 Plus 5G

Ahead, we have a detailed step-by-step procedure through which you can update Samsung Galaxy Note 10 Plus 5G to Android Pie build. The firmware is an official one signed by Samsung and we will utilize latest ODIN to flash it onto Galaxy Note 10 Plus 5G.

Please read every line carefully and make sure you read the tutorial once before actually performing on your device.

ODIN3 v3.09

To Remember:

  • This tutorial is only for Samsung Galaxy Note 10 Plus 5G. Please don’t try this on any other variants of the phone.
  • Firmwares used in this post are official releases by Samsung for the Galaxy Note 10 Plus 5G.
  • Make sure you backup all your data in your phone before proceeding.

Complete Step-By-Step Instructions:

Step 1 – Download Android Pie update from the following links for your specific Galaxy Note 10 Plus 5G model to your computer and extract the zip file.

Step 2 – Download Odin which will help you to install Android Pie update on Samsung Galaxy Note 10 Plus 5G.

Step 3 РSwitch OFF your phone. Now go to Download Mode. How? Press and hold the Volume Down + Power buttons together, and then press the Power button till you see the construction Android robot and a triangle. Press Power again to confirm to enter into Download Mode.

Step 4 – Make sure you have your Galaxy Note 10 Plus 5G USB drivers installed on your computer.

Step 5 – Open ODIN on your computer. Connect your phone to your computer while your phone is in the Download Mode.

Step 6 – If your phone is connected successfully, one of the ID:COM boxes will turn yellow with the COM port number. This step might take some time.

Step 7 – Now select the files that you have to flash/install on your phone. These files are to be found from the extracted files in Step 1.

  • Click on ‘AP’ and select file with ‘AP’ in its name.
  • Click on ‘CP’ and select file with ‘MODEM’ in its name. Ignore this step if there is no such file.
  • Click on ‘CSC’ and select file with ‘CSC’ in its name. Ignore this step if there is no such file.
  • Click on ‘PIT’ and select the .pit file. Ignore this step if there is no such file.
  • Click on ‘BL’ and select file with ‘BL’ in it’s name. Ignore if there is no such file.

If you are using an older version of ODIN or flashing a firmware which doesn’t have the above mentioned file name format then look below for the abbreviations to the old name format. Do note that only file name changes, the functionality and back end process remains the same so don’t worry.

  • AP = PDA
  • BL = Boot Loader
  • CP = Modem

Step 8 – In ODIN, check the Auto Reboot and F. Reset Time options. As for the Re-Partition option, check it ONLY if you selected a .PIT file in the above step.

Step 9 – Now click on the Start button in ODIN. Installation process will start and would take a few minutes to complete.

Step 10 – After the installation is completed, your phone will restart. After you see the home screen, unplug your phone from the computer.

That’s it. Your Samsung Galaxy Note 10 Plus 5G has now been updated to latest firmware update. Go to Settings > About phone to verify.

Backup and Other Important Tips

Please take a look at the following tips and important points you need to take care of. These are important, as we don’t want anyone losing their personal data or apps.

Always backup your important data that you might need after you install a new custom ROM, an official software update or anything else. Make a backup for just in case, you never know when anything might go wrong. Read: How to Backup Android Apps, Text Messages, WhatsApp, Call History.

Samsung users can also back up data using Samsung Smart Switch to your computer. Smart Switch helps to move data across different Android devices i.e moving Samsung Galaxy S9 backup data to Samsung Galaxy Note 10 Plus 5G.

If you already have a custom recovery (ClockworkMod, TWRP etc.) installed on your phone, we strongly recommend a backup using that as it creates a complete image of your existing phone set up. [Tutorial: How to Backup Android Phone using TWRP]

A few more optional tips that you should remember:

1. Having problems connecting your Android phone to the computer? You need to enable USB debugging mode. See here: How to Enable USB Debugging — for most Android versions including Android Pie.

2. Make sure your Android device is charged up to 80-85% battery level. This might help you: How to Check Battery Percentage. Why? Because, if your phone goes off suddenly while installing a custom ROM, flashing an official firmware update or installing mods etc. — your phone might get bricked or go dead permanently. No one wants that, right?

3. Most of the tutorials and how-to guides on Team Android are for factory unlocked Android phones and tablets. We recommend NOT to try our guides if your phone is locked to a carrier, unless we have specified the carrier name or device model.

That’s all! For if you have problems or issues with the steps, make sure to get to us via comments! Found any broken links? Let us know!

About the author

Taimur Akmal

Devoted writer, enjoys developing code. Appreciates excellent food, exceptional coffee and great company. He is also into sublime design and nicely built cars.