Tips & Tutorials

How to Enter Recovery Mode on Huawei Mate 20 / Mate 20 Pro

With our article, we would be focusing on how new Huawei Mate 20 / Mate 20 Pro / Mate 20 / Mate 20 Pro Pro / Mate 20 / Mate 20 Pro Lite users can access the recovery mode. The name recovery mode sounds a little bit technical and sometimes scary to unaccustomed users but we assure you, it is not. Well, in fact, recovery mode is quite handy and allows you to perform functions otherwise unavailable in the stock UI. Further, our procedure is designed to work on all Huawei Mate 20 / Mate 20 Pro smartphones regardless if they are running a stock recovery or a custom one like TWRP.

Enter Recovery Mode, Huawei Mate 20 / Mate 20 Pro

What is Recovery Mode?

Recovery mode is a built-in feature with Android OS. Phones which don’t have a recovery are bound by their respective manufacturers rather than Android itself. The thing which varies from device to device, is the method you use to gain access to the recovery.

Features at your disposal once you enter the recovery mode include the ability to apply an update. Usually this is done when you have access to the official update ZIP from Huawei. This method doesn’t void warranty and is itself used by Huawei. If you  have applied an OTA(Over-the-air) update on your phone, you’ll notice your phone rebooting into a screen where an Android figure is shown with a progress bar. This is the recovery.

After that, you can select to wipe either your cache partition or perform a full factory reset. Cache partition format allows for all the cache and temporary files to be deleted. Oppositely, Factory reset deletes everything except the basic system. This includes your user data and cache. You would be using either of these if your phone is stuck while booting or you are experiencing slow downs and app crashes.

We’ll also like to warn the dangers of recovery after you have read the benefits. Wrong use of recovery can potentially end up in loss of whole device or a corrupt system. Don’t worry the probability of this is very less as there are protective measures in place. Every file is first verified before proceeding the task and confirmation is taken once you select a task.

Custom recoveries are also very similar to the stock one. These recoveries include popular flavors such as CWM (ClockWorkMOD) and TWRP (TeamWinRecoveryProject). Accessing a custom recovery is same as accessing the stock one. Features you get with the custom variant is the ability to flash ZIPs (Custom ROMs and Themes), wipe certain partitions rather than cache and rest only, make system backups and more.

Huawei Mate 20 / Mate 20 Pro Recovery Mode

You can enter Recovery Mode on the Huawei Mate 20 / Mate 20 Pro using the following three methods:

  • by hardware buttons
  • by ADB on Windows
  • by ADB on Mac OS X

Let’s have a look at each method below. You can use whichever way you find the easiest.

NOTE: The following steps can be used to enter Recovery Mode on the Huawei Mate 20 / Mate 20 Pro.

Method 1 – Enter Recovery Mode using Hardware Buttons on Huawei Mate 20 / Mate 20 Pro

Step 1 – Turn OFF your phone.

Step 2 – Now press and hold the Volume Up button along with the Power Button for few seconds.

Step 3 –  You should let go of the power button as soon as the Huawei logo pops up. The phone should now boot into Recovery mode.

You can now navigate around the recovery mode using your volume and power buttons!

Method 2 – Enter Recovery Mode using ADB on Windows

Step 1 – Make sure USB drivers / ADB drivers for Huawei Mate 20 / Mate 20 Pro have been installed and ADB is configured on your computer.

Step 2 – Connect your Huawei Mate 20 to your PC with a USB cable and install ADB drivers (if needed).

Step 3 – Navigate to android-sdk-windows\platform-tools directory and open Command Prompt (Shift + Right-click anywhere in the folder > Open Command Prompt).

Step 4 – Type in the following command and press Enter.

adb reboot recovery

Step 5 – Your Huawei Mate 20 will turn OFF and then boot into the Recovery Mode. The Android in distress logo will be displayed, perform Step 4 from Method 1. If done successfully, you’ll be booted into recovery with all options displaying!

If you need any help regarding this, feel free to drop us a comment below or read: How to Enter Recovery Mode on Any Android Device.

Method 3 – Enter Recovery Mode using ADB on Mac OS X

Step 1 – Make sure USB drivers / ADB drivers for Huawei Mate 20 have been installed and ADB is configured on your computer.

Step 2 – Connect your Huawei Mate 20 to your Mac with a USB cable.

Step 3 – Now open Terminal app on your Mac and enter the following command and press Enter:

/<PATH>/android-sdk-macosx/platform-tools/adb reboot recovery

NOTE: <path> should be the location where your Android SDK is stored. If android-sdk-macosx is in your main user directory, you can skip the /<PATH>/ part from the line given above.

Step 4 – Your Huawei Mate 20 / Mate 20 Pro will turn OFF and then boot into the Recovery Mode. The Android in distress logo will be displayed, perform Step 4 from Method 1. If done successfully, you’ll be booted into recovery with all options displaying!

If you need any help regarding this, feel free to drop us a comment below or read: How to Enter Recovery Mode on Any Android Device.

About the author

Taimur Akmal

Devoted writer, enjoys developing code. Appreciates excellent food, exceptional coffee and great company. He is also into sublime design and nicely built cars.