Tips & Tutorials

Root VRU4CRE5 Android 8.0 on Verizon Galaxy S7 G930V Oreo Firmware

Once you complete updating your Verizon Galaxy S7 G930V to VRU4CRE5 Android 8.0 Oreo firmware, use instructions ahead to gain root. After quite a long delay, Galaxy S7 G930V users are finally getting official Oreo update from Samsung. Over the previous Nougat release, this new firmware brings some amazing features such as a revamped Samsung Experience. However, to have your favorite modifications and apps running, we recommend you use the steps ahead to implement root. Whether you had root running prior, any official firmware install nullifies it hence requiring you to start from scratch. For stability and reliability, utilities used for root include TWRP custom recovery and Magisk. Find below specific instructions on how to root Galaxy S7 G930V on VRU4CRE5 Android 8.0 Oreo firmware.

Despite the new firmware bringing the older S flagship up to speed, it still can not make up for older hardware which results in lower performance. To overcome that, to an extent, you can use different root utilities such as overclock and custom ROMs. Furthermore, you will find our root guide quite easy to implement as we have included few tips and tricks that will come in handy. Explained earlier, Magisk and TWRP custom recovery would be our utilities of choice mainly due to their reliability and compatibility. Keep reading to find detailed tips on how to root VRU4CRE5 Android 8.0 build on Samsung Galaxy S7 G930V.

Root VRU4CRE5 Android 8.0 on Galaxy S7 G930V

Disclaimer: All the custom ROMs and firmwares, official software updates, tools, mods or anything mentioned in the tutorial belong to their respective owners/developers. We ( or the developers are not to be held responsible if you damage or brick your device. We don’t have you on gun point to try out this tutorial 😉

Root VRU4CRE5 Android 8.0 on Galaxy S7 G930V:

OFFICIAL FIRMWARE: You need to make sure your Galaxy S7 G930V is on the following firmware update before proceeding – Android 8.0 VRU4CRE5 Oreo:

This section is important and we would recommend you to carefully go through it before proceeding below. Magisk method works well with the Samsung Galaxy S7 and is probably the most safest root method available. It fully supports Android 8.0 Oreo firmware and future firmware updates as well since it is not dependent on a single build.

Samsung Galaxy S7 comes in several different model numbers / variants. You need to make sure you know the correct model number of your device. Failure to do so, may brick your phone or you may lose phone data.

NOTE: This root method tutorial is only for the Galaxy S7 SM-G930V.

You may be interested in the following Galaxy S7 related articles:

Samsung Galaxy S7 USB Drivers

You will need to connect your Android phone with the computer. For that, please make sure you have installed the USB drivers for Samsung Galaxy S7 properly. If not, you can download the latest official drivers from our Android USB Drivers section here:

Download Samsung Galaxy S7 USB Drivers!

All set and ready? Good. Now, let’s proceed with the tutorial below and root VRU4CRE5 Android 8.0 official firmware on Samsung Galaxy S7 G930V.

How to Root Galaxy S7 G930V with Magisk on Android 8.0 Oreo

We have put together a detailed step-by-step instructions guide on how to root VRU4CRE5 Android 8.0 firmware on Galaxy S7 G930V with Magisk. Please read every line carefully below. We suggest that you should read the tutorial once before actually performing it on your phone.

Just To Remember:

  • This tutorial is only for Galaxy S7 G930V devices running Android 8.0 Oreo.
  • Your phone should be running latest Android 8.0 Oreo firmware.
  • Enjoy rooting your Samsung Galaxy S7 and let us know about it in the comments!

Complete Step-By-Step Instructions:

NOTE: You need to have a custom recovery installed.

Step 1 – Download Magisk Root ( for Galaxy S7 to your computer.

Step 2 – Connect your Galaxy S7 device to your computer using the USB cable.

Step 3 – Now copy/paste the downloaded files to your internal storage. Make sure the file is in the internal storage root (not in any folder).

Step 4 – Then turn OFF your phone and disconnect from the USB cable.

Step 5 – Now to get in the Recovery Mode (TWRP Recovery). Switch ON the phone while pressing and holding Volume Down + Power buttons together. Alternatively, read this: How to Access Recovery Mode on the Samsung Galaxy S7.

Root VRU4CRE5 Android 8.0 on Verizon Galaxy S7 G930V Oreo Firmware 10

NOTE: Screenshots of the Team Win Recovery Project (TWRP Recovery) may change as new versions are released.

Step 6 – Once finished, tap on the ‘Install’ button from the list, choose the Magisk-v16.1(1610).zip file that you copied to your phone memory in Step 3.


Step 7 – Confirm installation on the next screen by swiping on the “Swipe to Confirm Flash” option. The installation procedure should start now as show below.

Step 8 – Once the installation is completed, you will be shown a similar screen like shown below.

Step 9 – Once you complete the second flash, you can now reboot to your system.

That’s it! You should now have a rooted Galaxy S7 device. You can go to MagiskManager app to verify.

To make sure you have correctly installed the above root method and it’s working, verify with Root Checker as given in the link.

Backup and Other Important Tips

Please take a look at the following tips and important points you need to take care of. These are important, as we don’t want anyone losing their personal data or apps.

Always backup your important data that you might need after you install a new custom ROM, an official software update or anything else. Make a backup for just in case, you never know when anything might go wrong. Read: How to Backup Android Apps, Text Messages, WhatsApp, Call History.

Samsung users can also back up data using Samsung Smart Switch to your computer. Smart Switch helps to move data across different Android devices i.e moving Samsung Galaxy S7 Edge backup data to Samsung Galaxy S7.

If you already have a custom recovery (ClockworkMod, TWRP etc.) installed on your phone, we strongly recommend a backup using that as it creates a complete image of your existing phone set up. [Tutorial: How to Backup Android Phone using TWRP]

A few more optional tips that you should remember:

1. Having problems connecting your Android phone to the computer? You need to enable USB debugging mode. See here: How to Enable USB Debugging — for Gingerbread, Ice Cream Sandwich, Jelly Bean, KitKat, Lollipop, Marshmallow and Oreo.

2. Make sure your Android device is charged up to 80-85% battery level. This might help you: How to Check Battery Percentage. Why? Because, if your phone goes off suddenly while installing a custom ROM, flashing an official firmware update or installing mods etc. — your phone might get bricked or go dead permanently. No one wants that, right?

3. Most of the tutorials and how-to guides on Team Android are for factory unlocked Android phones and tablets. We recommend NOT to try our guides if your phone is locked to a carrier, unless we have specified the carrier name or device model.

Have fun playing with it! If you have any issues, please fire them up in the comments below!

About the author

Taimur Akmal

Devoted writer, enjoys developing code. Appreciates excellent food, exceptional coffee and great company. He is also into sublime design and nicely built cars.


Leave a Comment