Tips & Tutorials

Install Android 6.0.1 on Galaxy Note 4 SM-N910F eRobot Marshmallow Custom ROM

eRobot is one of the best ROM around for stable Custom ROM experience. It has tons of tweaks and customization options. It based on Official Android 6.0.1 Marshmallow. If interested in 6.0.1 for other phones, check out our new Custom ROMs section. You can update Galaxy Note 4 N910F to 6.0.1 eRobot Marshmallow custom firmware using the tutorial below. Your Galaxy Note 4 N910F should be rooted and have a custom recovery (ClockworkMod recovery / TWRP recovery) installed. This is not an official release by Samsung, but just a custom ROM which would require a custom recovery in order to flash the ROM zip file on your phone.

As you continue reading below, we will guide you through the entire process of how to install 6.0.1 eRobot Marshmallow on Galaxy Note 4 SM-N910F with complete steps. Don’t forget to read all the tips below that you have to keep in mind before proceeding. Please make sure you backup all your data as given below because this tutorial will wipe your data. The following tips are important as they will help the installation procedure to go smooth without any issues. Let’s get to the tutorial now.

Disclaimer: All the custom ROMs and firmwares, official software updates, tools, mods or anything mentioned in the tutorial belong to their respective owners/developers. We ( or the developers are not to be held responsible if you damage or brick your device. We don’t have you on gun point to try out this tutorial ūüėČ

6.0.1 eRobot Marshmallow ROM Details:

This amazing eRobot custom ROM comes with tons of new features and is based on 6.0.1 Marshmallow. A quick list of the main features in eRobot is given below and we are sure you’d love to use this on your Galaxy Note 4 N910F:

  • + Based On¬†Phone¬†: XXS2DQG6 ,CSC : OLB2DPE3
    + Full Deodexed and ZipAlign
    + Root SuperSU
    + Bloodware app removed
    + In-Out Call Recorder
    + Add Shutter sound on/off to camera
    + 3 Minit battery mod
    + Callog show All call by default
    + 5 way reboot
    + Full remove Knox
    + Setting togle to show or hide network trafic on statusbar
    + Mod custom toolbox (Support 12 app)
    + SmsMaxByte = 999
    + Contact Set Link Count Max As = 999
    + Contact Extend Speed Dial To 100
    + Contact Limit Name Length = 1500
    + Enable Sms Callback Number
    + Enable SMS FolderView
    + Enable Blocked Messages
    + Enable Locked Messages
    + Enable Callback Number
    + Disable Sms To Mms Conversion By Text Input
    + Enable Call/message block on setting
    + Note 5 DPI
    + Weather widget size fix to 5×1
    + Mod weather to look like note 5 weather
    + 25 Toggle Statusbar
    + Add note 5 Setup Wizard
    + Add Floating message
    + Add bloatware remove scripts
    + Add Note 5 Splanner
    + Support 3 multi user
    + Other features live V.21
    + GraceUX and Note 5 and C5 app port
    – Gallery
    – Myfiles
    – Calculator
    – Touchwiz
    – S Planner
    – Email
    – Write on PDF
    – S-Voice
    – Photoeditor
    – S Planner
    –¬†Music Player
    РVoice recorder
    – Memo
    – Contact and Call

There are tons of useful articles and how-to guides on Team Android for the Samsung Galaxy Note 4, but we think you might be interested in the following posts:

Like this eRobot ROM based on the latest 6.0.1? We love it too and we know you are looking forward to install it on your phone now. Now please read below for important tips on how to make sure your installation goes smooth and you do not end up with any problems.

Samsung Galaxy Note 4 USB Drivers

You will need to connect your Android phone with the computer. For that, please make sure you have installed the USB drivers for Samsung Galaxy Note 4 properly. If not, you can download the latest official drivers from our Android USB Drivers section here:

Download Samsung Galaxy Note 4 USB drivers!

Backup and Other Important Tips

Done with the USB drivers? Perfect. The tutorial is on the next page, but first, please take a look at the following tips and important points you need to take care of. These are important, as we don’t want anyone losing their personal data or apps:

Always backup your important data that you might need after you install a new custom ROM, an official software update or anything else. Make a backup for just in case, you never know when anything might go wrong. See below for some tips on how to backup data:

Samsung users can also back up data using Samsung KIES. If you backup data manually, you get more options what to choose from and it is very easy to move data across Android devices from different manufacturers, i.e moving Samsung Galaxy Note 4 backup data to Sony Xperia Z3

If you already have a custom recovery (ClockworkMod, TWRP etc.) installed on your phone, we strongly recommend a backup using that as it creates a complete image of your existing phone set up.

A few more optional tips that you should remember:

1. Having problems connecting your Android phone to the computer? You need to enable USB debugging mode. See here: How to Enable USB Debugging — for Gingerbread, Ice Cream Sandwich, Jelly Bean, KitKat and Lollipop.

2. Make sure your Android device is charged up to 80-85% battery level. This might help you: How to Check Battery Percentage. Why? Because, if your phone goes off suddenly while installing a custom ROM, flashing an official firmware update or installing mods etc. — your phone might get bricked or go dead permanently. No one wants that, right?

4. Most of the tutorials and how-to guides on Team Android are for factory unlocked Android phones and tablets. We recommend NOT to try our guides if your phone is locked to a carrier, unless we have specified the carrier name or device model.

If you find the above tips useful and they were helpful to you, please consider giving us a +1 or LIKE to thank us!

All set and ready? Good. Now, let’s proceed with the tutorial on the next page and update Galaxy Note 4 N910F to 6.0.1 eRobot Marshmallow custom firmware.