After you have updated your Galaxy S7 Edge, you can use this guide to root XXU1DQC4 Android 7.0 Nougat firmware. The newest update from Samsung brings in a newer security patch and other minor bug-fixes. However, once you update to it, the phone’s root status would be reset back to stock. Hence, if you had it rooted before, you would have to re-do the whole process. Thankfully, in order to root XXU1DQC4 Android 7.0 Nougat firmware on Galaxy S7 Edge G935F is quite easy. We will be using TWRP and SuperSU in our tutorial below. If you aren’t yet convinced about rooting or want to know a little more about it, read: Benefits of rooting an Android device. The only thing you will give in exchange would be your warranty, if that still applies that is. Before proceeding make sure phone is on G935FXXU1DQC4 build. You can root Galaxy S7 Edge SM-G935F on XXU1DQC4 Android 7.0 Nougat official firmware using the tutorial below.

As you continue reading further, we will guide you through the entire process of how to root XXU1DQC4 Android 7.0 on Samsung Galaxy S7 Edge LTE G935F using TWRP and SuperSU. Make sure you backup all your data before trying out the root method tutorial below because we don’t want you to lose anything. Rooting will allow you to install root apps on your phone, i.e Titanium Backup. Read our list of the essential root apps you should install! The following tips are important as they will help the installation procedure to go smooth without any issues. Let’s continue with the tutorial now.


Disclaimer: All the custom ROMs and firmwares, official software updates, tools, mods or anything mentioned in the tutorial belong to their respective owners/developers. We ( or the developers are not to be held responsible if you damage or brick your device. We don’t have you on gun point to try out this tutorial 😉

Root XXU1DQC4 Android 7.0 on Galaxy S7 Edge G935F:


OFFICIAL FIRMWARE: You need to make sure your Galaxy S7 Edge G935F is on the following firmware update before proceeding – Android 7.0 XXU1DQC4 Nougat:

You may be interested in the following Galaxy S7 Edge related articles:

NOTE: This root method tutorial is only for the Galaxy S7 Edge SM-G935F.

Samsung Galaxy S7 Edge USB Drivers

You will need to connect your Android phone with the computer. For that, please make sure you have installed the USB drivers for Samsung Galaxy S7 Edge properly. If not, you can download the latest official drivers from our Android USB Drivers section here:

Download Samsung Galaxy S7 Edge USB drivers!

Backup and Other Important Tips

Done with the USB drivers? Perfect. The tutorial is on the next page, but first, please take a look at the following tips and important points you need to take care of. These are important, as we don’t want anyone losing their personal data or apps:

Always backup your important data that you might need after you install a new custom ROM, an official software update or anything else. Make a backup for just in case, you never know when anything might go wrong. See below for some tips on how to backup data:

Samsung users can also back up data using Samsung KIES. If you backup data manually, you get more options what to choose from and it is very easy to move data across Android devices from different manufacturers, i.e moving Samsung Galaxy Note backup data to HTC One X.

If you already have a custom recovery (ClockworkMod, TWRP etc.) installed on your phone, we strongly recommend a backup using that as it creates a complete image of your existing phone set up.

A few more optional tips that you should remember:

1. Having problems connecting your Android phone to the computer? You need to enable USB debugging mode. See here: How to Enable USB Debugging — for Gingerbread, Ice Cream Sandwich and Nougat.

2. Make sure your Android device is charged up to 80-85% battery level. This might help you: How to Check Battery Percentage. Why? Because, if your phone goes off suddenly while installing a custom ROM, flashing an official firmware update or installing mods etc. — your phone might get bricked or go dead permanently. No one wants that, right?

4. Most of the tutorials and how-to guides on Team Android are for factory unlocked Android phones and tablets. We recommend NOT to try our guides if your phone is locked to a carrier, unless we have specified the carrier name or device model.

If you find the above tips useful and they were helpful to you, please consider giving us a +1 or LIKE to thank us!

All set and ready? Good. Now, let’s proceed with the tutorial on the next page and root Galaxy S7 Edge LTE G935F on XXU1DQC4 Android 7.0 official firmware.

1 2

Devoted writer, enjoys developing code. Appreciates excellent food, exceptional coffee and great company. He is also into sublime design and nicely built cars.


  1. Tommy Roost Reply

    Once rooted when I give any app su privileges it freezes and restarts any help?

  2. Thanks for your write up.
    Is this procedure also applicable to the latest firmware update (May 1 2017), which gives us Build number G35FXXU1DQE7 and Baseband version G35FXXU1DQD7?

Write A Comment