Tips & Tutorials

How to Install Galaxy A5 (2017) TWRP 3.0.2 Recovery – Complete Guide

HOW TO: Install TWRP 3.0.2 Recovery on Samsung Galaxy A5 (2017)

We have put together a detailed step-by-step instructions guide for how to install TWRP 3.0.2 custom recovery on Galaxy A5 (2017). If you are used to installing official updates through ODIN on Samsung Galaxy devices, then this should not be any different for you.

Please read every line carefully and make sure you read the tutorial once before actually performing it on your Android device.

ODIN3 v3.09

To Remember:

  • This TWRP 3.0.2 recovery installation tutorial is only for Galaxy A5 (2017) . Please do not try on any other Galaxy A5 (2017) variants.
  • Make sure you backup all your data in your phone before proceeding as a precaution.
  • This TWRP 3.0.2 Recovery tutorial works with Android 5.0.2 and all future Android updates.
  • Go to Settings > About device on your Galaxy A5 (2017) and check your model no. It should be or do not proceed.
  • Samsung Galaxy A5 (2017) Variants supported:
    • A520F

Complete Step-By-Step Instructions:

Step 1 – Download TWRP 3.0.2 Recovery package for Samsung Galaxy A5 (2017) and extract this file anywhere in your computer:

NOTE: Make sure you select the appropriate file above for your Galaxy A5 (2017) model.

Step 2 – Download ODIN v3.09 which will help you to install CWM Recovery on Samsung Galaxy A5 (2017) .

Step 3 – Switch OFF your phone. Now go to Download Mode. How? Press and hold the Volume Down + Home buttons together, and then press the Power button till you see the construction Android robot and a triangle. Press Power again to confirm to enter into Download Mode.

Step 4 – Make sure you have your Samsung Galaxy A5 (2017) USB drivers installed on your computer.

Step 5 – Open ODIN on your computer. Connect your phone to your computer while your phone is in the Download Mode.

Step 6 – If your phone is connected successfully, one of the ID:COM boxes will turn yellow with the COM port number. This step might take some time.

Step 7 – Now select the following file that you have to flash/install on your phone. This file will be found from the extracted file in Step 1.

  • Click on ‘PDA’ / ‘AP’ and select the CWM package file you downloaded in step 1 for your phone.

Step 8 – In ODIN, uncheck the Auto Reboot and  check F. Reset Time options, if not already.

Step 9 – Now click on the Start button in ODIN. Installation process will start and would take a few minutes to complete.

Step 10 – After the installation is completed, you should hold your Power Button, Volume Button and Home Button until the screen turns black.

Step 11 – Once it does, you need to let go of the Volume Down button and hold the Volume Up button while still pressing the other listed buttons. This will boot the phone into Recovery mode and you should now see TWRP 3.0 custom recovery interface.

Step 12 – You can now reboot your phone by touching the reboot option in TWRP.

That’s it! Your Samsung Galaxy A5 (2017) has now been flashed with TWRP 3.0.2. To enter Recovery Mode, shut down phone and then hold down the Home + Volume Up buttons and press the Power button for about 5 seconds to enter Recovery Mode.

Hit +1 or LIKE to thank us!

Whenever you restart your phone, stock recovery keeps showing up? There is a fix for that. For details on how to make TWRP 3.0.2 permanent on your Android phone, head over to the next page.

About the author

Taimur Akmal

Devoted writer, enjoys developing code. Appreciates excellent food, exceptional coffee and great company. He is also into sublime design and nicely built cars.

3 Comments

Leave a Comment