How to Root Note 5 N920C with CF Auto-Root Package on Android 6.0.1 Marshmallow
We have put together a detailed step-by-step instructions guide on how to root Note 5 N920C with SuperSU. Please read every line carefully below. We suggest that you should read the tutorial once before actually performing it on your phone.
- This root method tutorial is only for Note 5 SM-N920C. Please do not try on any other Note 5 LTE variants.
- Make sure you backup all your data in your phone before proceeding as a precaution.
- Your Note 5 should be on an official firmware by Samsung, not a custom ROM.
- Your phone should be on XXU3BPJ9 Android 6.0.1 firmware.
If you have fulfilled all the requirements above, then proceed to the actual tutorial.
Complete Step-By-Step Instructions:
Step 1 – Download CF-Auto-Root Android 6.0.1 Package for Samsung Galaxy Note 5 N920C.
Step 2 – Download ODIN v3.09 which will help you to root Android 6.0.1 on Samsung Samsung Galaxy S6 Edge LTE G925F.
Step 3 – Switch OFF your phone. Now go to Download Mode. How? Press and hold the Volume Down + Home buttons together, and then press the Power button till you see the construction Android robot and a triangle. Press Power again to confirm to enter into Download Mode.
Step 4 – Make sure you have your Samsung Galaxy S6 Edge LTE USB drivers installed on your computer.
Step 5 – Open ODIN on your computer. Connect your phone to your computer while your phone is in the Download Mode.
Step 6 – If your phone is connected successfully, one of the ID:COM boxes will turn yellow with the COM port number. This step might take some time.
Step 7 – Now select the file that you have to flash/install on your phone. This file will be found from the extracted file in Step 1.
- Click on ‘PDA’ / ‘AP’ and select the file you downloaded and extracted in Step 1.
Step 8 – In ODIN, check the Auto Reboot and F. Reset Time options, if not already.
Step 9 – Now click on the Start button in ODIN. Installation process will start and would take a few minutes to complete.
Step 10 – After the installation is completed, your phone will reboot into Recovery Mode automatically and install the root package / files. Your ID:COM box will also turn green.
Step 11 – After you see the home screen, unplug your phone from the computer.
That’s it! Your Samsung Galaxy S6 Edge has now been rooted on Android 6.0.1 official software update. Check for the SuperSU app in your apps list to verify.
To make sure you have correctly installed the above root method and it’s working, verify with Root Checker as given in the link.
Hit +1 or LIKE to thank us!
If you run into any problems, feel free to drop us a comment below and we will reply you back ASAP with the fix or the solution to your problem.