HOW TO: Root Galaxy S6 Edge Plus with Android 6.0.1 Marshmallow Firmware
We have put together a detailed step-by-step instructions guide for how to root Android 6.0.1 on Galaxy S6 Edge Plus. If you are used to installing official updates through ODIN on Samsung Galaxy devices, then this should not be any different for you. A reminder to carefully check what is your Samsung Galaxy S6 Edge Plus model, as we have mentioned earlier in this guide.
Please read every line carefully and make sure you read the tutorial once before actually performing it on your Android device.
- This root method tutorial is only for Galaxy S6 Edge Plus. Please make sure you only download the root package for your own model number.
- Make sure you backup all your data in your phone before proceeding as a precaution.
- This root method works with Android 6.0.1 firmwares and all future Android updates as well.
- Your Galaxy S6 Edge Plus should be on an official firmware by Samsung, not a custom ROM.
Complete Step-By-Step Instructions:
Step 1 – Download Auto-Root Package for Samsung Galaxy S6 Edge Plus to your computer and place the file on your desktop. This package supports the following Samsung Galaxy S6 Edge Plus variants:
- Samsung Galaxy S6 Edge Plus G928F
- Samsung Galaxy S6 Edge Plus G928I
- Samsung Galaxy S6 Edge Plus G928S
- Samsung Galaxy S6 Edge Plus G928K
- Samsung Galaxy S6 Edge Plus G928L
- Samsung Galaxy S6 Edge Plus G928T
- Samsung Galaxy S6 Edge Plus G928W8
Step 2 – Download ODIN v3.09 which will help you to root Android 6.0.1 on Samsung Samsung Galaxy S6 Edge Plus.
Step 3 – Switch OFF your phone. Now press and hold the Volume Down + Home buttons together, and then press the Power button till you see a warning screen (as shown below). Press Volume Up to confirm and proceed to the Download Mode.
Step 4 – Make sure you have your Samsung Galaxy S6 Edge Plus USB drivers installed on your computer.
Step 5 – Open ODIN on your computer. Connect your phone to your computer while your phone is in the Download Mode.
Step 6 – If your phone is connected successfully, one of the ID:COM boxes will turn yellow with the COM port number. This step might take some time.
Step 7 – Now select the file that you have to flash/install on your phone. This file will be found on the desktop like mentioned in Step 1.
- Click on ‘PDA’ or ‘AP’ and select the file.
Step 8 – In ODIN, check the Auto Reboot and F. Reset Time options, if not already.
Step 9 – Now click on the Start button in ODIN. Installation process will start and would take a few minutes to complete.
Step 10 – After the installation is completed, your phone will reboot into Recovery Mode automatically and install the root package / files. Your ID:COM box will also turn green.
Step 11 – After you see the home screen, unplug your phone from the computer.
NOTE: Sometimes the device does NOT boot into Recovery Mode automatically (as given in Step 10) and root your device. If that happens, do the entire procedure again.
OPTIONAL: Still not rooted? Once again perform the entire tutorial, but make sure in ODIN, the “Auto Reboot” option is NOT checked. Then after installation (Step 10), do the following:
Step 11 – Pull out the battery to turn OFF the phone forcefully.
Step 12 – Now boot (turn ON your phone) with Volume Up + Home + Power buttons to go directly into Recovery Mode manually. This will start the install process of rooting your phone.
That’s it! Your Samsung Galaxy S6 Edge Plus has now been rooted on Android 6.0.1 official software update. Check for the SuperSU app in your apps list to verify.
To make sure you have correctly installed the above root method and it’s working, verify with Root Checker as given in the link.
Hit +1 or LIKE to thank us!
If you run into any problems, feel free to drop us a comment below and we will reply you back ASAP with the fix or the solution to your problem.