HOW TO: Install TWRP 184.108.40.206 Recovery on Samsung Galaxy J1 Ace
We have put together a detailed step-by-step instructions guide for how to install TWRP 220.127.116.11 custom recovery on Galaxy J1 Ace. If you are used to installing official updates through ODIN on Samsung Galaxy devices, then this should not be any different for you.
Please read every line carefully and make sure you read the tutorial once before actually performing it on your Android device.
- This TWRP 18.104.22.168 recovery installation tutorial is only for Galaxy J1 Ace . Please do not try on any other Galaxy J1 Ace variants.
- Make sure you backup all your data in your phone before proceeding as a precaution.
- This TWRP 22.214.171.124 Recovery tutorial works with Android 5.0.2 and all future Android updates.
- Go to Settings > About device on your Galaxy J1 Ace and check your model no. It should be or do not proceed.
Complete Step-By-Step Instructions:
Step 1 – Download TWRP 126.96.36.199 Recovery package for Samsung Galaxy J1 Ace and extract this file anywhere in your computer:
- Samsung Galaxy J1 Ace (LTE): twrp-188.8.131.52-j1acelte.img.tar
NOTE: Make sure you select the appropriate file above for your Galaxy J1 Ace model.
Step 2 – Download ODIN v3.09 which will help you to install CWM Recovery on Samsung Galaxy J1 Ace .
Step 3 – Switch OFF your phone. Now go to Download Mode. How? Press and hold the Volume Down + Home buttons together, and then press the Power button till you see the construction Android robot and a triangle. Press Power again to confirm to enter into Download Mode.
Step 4 – Make sure you have your Samsung Galaxy J1 Ace USB drivers installed on your computer.
Step 5 – Open ODIN on your computer. Connect your phone to your computer while your phone is in the Download Mode.
Step 6 – If your phone is connected successfully, one of the ID:COM boxes will turn yellow with the COM port number. This step might take some time.
Step 7 – Now select the following file that you have to flash/install on your phone. This file will be found from the extracted file in Step 1.
- Click on ‘PDA’ / ‘AP’ and select the package file (twrp-184.108.40.206-j1acelte.img.tar) you downloaded in step 1 for your phone.
Step 8 – In ODIN, check the Auto Reboot and F. Reset Time options, if not already.
Step 9 – Now click on the Start button in ODIN. Installation process will start and would take a few minutes to complete.
Step 10 – After the installation is completed, your phone will reboot into Recovery Mode automatically and install the root package / files. Your ID:COM box will also turn green.
Step 11 – After you see the home screen, unplug your phone from the computer.
That’s it! Your Samsung Galaxy J1 Ace has now been flashed with TWRP 220.127.116.11. To enter Recovery Mode, shut down phone and then hold down the Home + Volume Up buttons and press the Power button for about 5 seconds to enter Recovery Mode.
Hit +1 or LIKE to thank us!
Whenever you restart your phone, stock recovery keeps showing up? There is a fix for that. For details on how to make TWRP 18.104.22.168 permanent on your Android phone, head over to the next page.