Tips & Tutorials

Root Galaxy S6 Edge on Android 5.0.2 Lollipop Official Firmware

As part of a multi-post series for this amazing new phone, this post will show you how to root Galaxy S6 Edge. The entire rooting process will remain same for most of the variants so we have made this post general and applicable to all. Since we will be using the CF-Auto-Root tool, we have added and linked all the root packages below so you can download them depending on your Samsung Galaxy S6 Edge model number. Find the one which matches your device and follow rest of the steps. It is recommended you have the latest Android 5.0.2 Lollipop or any other latest firmware build from Samsung installed before proceeding any further. Hopefully all future updates from Samsung will also work with this post, such as the imminent Android 5.1 Lollipop firmware coming very soon! Confused about rooting? Please read this out: Benefits of rooting an Android device. You can root Galaxy S6 Edge on Android 5.0.2 Lollipop official firmware using the tutorial given on the next page.

Our guide will be an all-in-one tutorial for rooting the Samsung Galaxy S6 Edge. This is also why we chose CF-Auto-Root. Compatibility, reliability and security are few of the things which set this package apart from others. Long time Samsung supporters are sure to have read this name before. To be on the safe side, we want you to go through some of the precautionary tips that you have to remember. Make sure you backup all your data before trying out the root method tutorial, even though no data will be lost, we still recommend making a backup of all your data. The following tips are important as they will help the installation procedure to go smooth without any issues. Let’s continue with the tutorial now.

Samsung-Galaxy-S6-Edge

Disclaimer: All the custom ROMs and firmwares, official software updates, tools, mods or anything mentioned in the tutorial belong to their respective owners/developers. We (TeamAndroid.com) or the developers are not to be held responsible if you damage or brick your device. We don’t have you on gun point to try out this tutorial 😉

Root Galaxy S6 Edge on Android 5.0.2 Lollipop – CF-Root Method Details:

A few important things to note here. CF-Auto-Root method works well with the Galaxy S6 Edge and is probably the most safest root method available. It fully supports Android 5.0.2 Lollipop firmware and future firmwares as well since it is not firmware dependent.

What is your Samsung Galaxy S6 Edge Model Number?

Please check for the exact Samsung Galaxy S6 Edge phone model that you have. You will be required to download the root package later in the post which would be different for every variant of the Samsung Galaxy S6 Edge, depending on your region of purchase. How to check phone model? Follow the quick easy steps given below.

  • Go to Settings on your phone
  • Scroll down till you see “About device” or “About phone” and tap there
  • Note down what is written under “Model number”

This is the exact model number of your Samsung Galaxy S6 Edge.

For those who are not sure about CF-Root, please read the following two paragraphs for a quick intro to the root package:

CF-Root is the root for “rooting beginners” and those who want to keep as close to stock as possible. CF-Root is meant to be used in combination with stock Samsung firmwares, and be the quickest and easiest way for your first root. A modified recovery and cache partition will be flashed, which will install (only) SuperSU, then clean-up the cache partition and re-flash the stock recovery.

NOTE: Using this root increases your flash counter. You should run Triangle Away after rooting to reset the counter. Note that if you want to run custom kernels or custom recoveries, your flash counter will be set to 1 at every boot. Either configure Triangle Away to reset the counter at every boot (Play version only) or only reset the counter when you need to go into warranty.

For those interested, check out these other related articles as well:

Samsung Galaxy S6 Edge USB Drivers

You will need to connect your Android phone with the computer. For that, please make sure you have installed the USB drivers for Samsung Galaxy S6 Edge properly. If not, you can download the latest official drivers from our Android USB Drivers section here:

Download Samsung Galaxy S6 Edge USB drivers!

Backup and Other Important Tips

Done with the USB drivers? Perfect. The tutorial is on the next page, but first, please take a look at the following tips and important points you need to take care of. These are important, as we don’t want anyone losing their personal data or apps:

Always backup your important data that you might need after you install a new custom ROM, an official software update or anything else. Make a backup for just in case, you never know when anything might go wrong. See below for some tips on how to backup data:

Samsung users can also back up data using Samsung KIES. If you backup data manually, you get more options what to choose from and it is very easy to move data across Android devices from different manufacturers, i.e moving Samsung Galaxy Note backup data to HTC One X.

If you already have a custom recovery (ClockworkMod, TWRP etc.) installed on your phone, we strongly recommend a backup using that as it creates a complete image of your existing phone set up.

A few more optional tips that you should remember:

1. Having problems connecting your Android phone to the computer? You need to enable USB debugging mode. See here: How to Enable USB Debugging — for Gingerbread, Ice Cream Sandwich and Lollipop.

2. Make sure your Android device is charged up to 80-85% battery level. This might help you: How to Check Battery Percentage. Why? Because, if your phone goes off suddenly while installing a custom ROM, flashing an official firmware update or installing mods etc. — your phone might get bricked or go dead permanently. No one wants that, right?

4. Most of the tutorials and how-to guides on Team Android are for factory unlocked Android phones and tablets. We recommend NOT to try our guides if your phone is locked to a carrier, unless we have specified the carrier name or device model.

If you find the above tips useful and they were helpful to you, please consider giving us a +1 or LIKE to thank us!

All set and ready? Good. Now, let’s proceed with the tutorial on the next page and root Samsung Galaxy S6 Edge on Android 5.0.2 official firmware.