Tips & Tutorials

Root XXUEBOA6 Android 5.0 on Galaxy Note 3 N900 Official Firmware

Here is how you can root XXUEBOA6 Android 5.0 Lollipop firmware update that has brought a major revamp to the Galaxy Note 3 N900. This firmware kicks off the official roll out of Android 5.0 Lollipop to the old phablet, Galaxy Note 3. Previously, leaked builds surfaced the internet but due to bugs they couldn’t be used as daily drivers. However, we hope this new update fixes them and provides a new flawless experience to the average user. Adding more value, you can now also root your Galaxy Note 3 N900 on XXUEBOA6 Android 5.0 firmware. We have a full guide explaining, in detail, each and every step required for the process. We would deviate from the traditional ODIN method as Android 5.0 Lollipop is not supported by CF-Auto-Root, yet. Don’t worry, this process isn’t complicated. Why would you root your recently revamped Note 3? Read: Benefits of rooting an Android device. We are set to provide the most easiest tutorials available and we hope to set this as a worthy example. All things good come with a catch, in this scenario, it isn’t big. You would lose your warranty after this. Before proceeding make sure phone is on N900XXUEBOA6 build. You can root Galaxy Note 3 SM-N900 on XXUEBOA6 Android 5.0 Lollipop official firmware using the tutorial below.

As you continue reading further, we will guide you through the entire process of how to root XXUEBOA6 Android 5.0 on Samsung Galaxy Note 3 LTE N900 using ODIN and CF-Auto-Root tool. Make sure you backup all your data before trying out the root method tutorial below because we don’t want you to lose anything. Rooting will allow you to install root apps on your phone, i.e Titanium Backup. Read our list of the essential root apps you should install! The following tips are important as they will help the installation procedure to go smooth without any issues. Let’s continue with the tutorial now.

Samsung Galaxy Note 3 SM-N900

Disclaimer: All the custom ROMs and firmwares, official software updates, tools, mods or anything mentioned in the tutorial belong to their respective owners/developers. We (TeamAndroid.com) or the developers are not to be held responsible if you damage or brick your device. We don’t have you on gun point to try out this tutorial 😉

Root XXUEBOA6 Android 5.0 on Galaxy Note 3 N900:

A few important things to note here about CF-Auto-Root, that this method works well with the Galaxy Note 3 LTE N900 and is probably the most safest root method available. It fully supports Android 5.0 Lollipop firmware. For those who are not sure about CF-Root, please read the following two paragraphs for a quick intro to the root package:

CF-Root is the root for “rooting beginners” and those who want to keep as close to stock as possible. CF-Root is meant to be used in combination with stock Samsung firmwares, and be the quickest and easiest way for your first root. A modified recovery and cache partition will be flashed, which will install (only) SuperSU, then clean-up the cache partition and re-flash the stock recovery.

NOTE: Using this root increases your flash counter. You should run Triangle Away after rooting to reset the counter. Note that if you want to run custom kernels or custom recoveries, your flash counter will be set to 1 at every boot. Either configure Triangle Away to reset the counter at every boot (Play version only) or only reset the counter when you need to go into warranty.

OFFICIAL FIRMWARE: You need to make sure your Galaxy Note 3 N900 is on the following firmware update before proceeding – Android 5.0 XXUEBOA6 Lollipop:

You may be interested in the following Galaxy Note 3 related articles:

NOTE: This root method tutorial is only for the Galaxy Note 3 SM-N900 (Exynos Octa-core CPU). In case you are looking for a root tutorial for the Galaxy Note 3 SM-N900 (Exynos 5, Octa-core CPU), read here!

Samsung Galaxy Note 3 USB Drivers

You will need to connect your Android phone with the computer. For that, please make sure you have installed the USB drivers for Samsung Galaxy Note 3 properly. If not, you can download the latest official drivers from our Android USB Drivers section here:

Download Samsung Galaxy Note 3 USB drivers!

Backup and Other Important Tips

Done with the USB drivers? Perfect. The tutorial is on the next page, but first, please take a look at the following tips and important points you need to take care of. These are important, as we don’t want anyone losing their personal data or apps:

Always backup your important data that you might need after you install a new custom ROM, an official software update or anything else. Make a backup for just in case, you never know when anything might go wrong. See below for some tips on how to backup data:

Samsung users can also back up data using Samsung KIES. If you backup data manually, you get more options what to choose from and it is very easy to move data across Android devices from different manufacturers, i.e moving Samsung Galaxy Note backup data to HTC One X.

If you already have a custom recovery (ClockworkMod, TWRP etc.) installed on your phone, we strongly recommend a backup using that as it creates a complete image of your existing phone set up.

A few more optional tips that you should remember:

1. Having problems connecting your Android phone to the computer? You need to enable USB debugging mode. See here: How to Enable USB Debugging — for Gingerbread, Ice Cream Sandwich and Lollipop.

2. Make sure your Android device is charged up to 80-85% battery level. This might help you: How to Check Battery Percentage. Why? Because, if your phone goes off suddenly while installing a custom ROM, flashing an official firmware update or installing mods etc. — your phone might get bricked or go dead permanently. No one wants that, right?

4. Most of the tutorials and how-to guides on Team Android are for factory unlocked Android phones and tablets. We recommend NOT to try our guides if your phone is locked to a carrier, unless we have specified the carrier name or device model.

If you find the above tips useful and they were helpful to you, please consider giving us a +1 or LIKE to thank us!

All set and ready? Good. Now, let’s proceed with the tutorial on the next page and root Galaxy Note 3 LTE N900 on XXUEBOA6 Android 5.0 official firmware.

About the author

Taimur Akmal

Devoted writer, enjoys developing code. Appreciates excellent food, exceptional coffee and great company. He is also into sublime design and nicely built cars.

Leave a Comment