Tips & Tutorials

Update Galaxy S4 Active I9295 to XXUCNI1 Android 4.4.2 Stock Firmware

How to Install XXUCNI1 Android 4.4.2 on Galaxy S4 Active I9295

We have put together a detailed step-by-step instructions guide on how to update Samsung Galaxy S4 Active to Android 4.4.2 XXUCNI1. If you are used to installing official updates through ODIN on Samsung Galaxy devices, then this should not be any different for you.

Please read every line carefully and make sure you read the tutorial once before actually performing on your device.

ODIN3 v3.09

 

To Remember:

  • This tutorial is only for Samsung Galaxy S4 Active I9295. Please don’t try this on any other variants of the phone.
  • I9295XXUCNI1 is an official firmware by Samsung for the Galaxy S4 Active I9295.
  • Make sure you backup all your data in your phone before proceeding.
  • Double check and read the tips on the previous page once again to make sure everything is in order.

Rooting Warning: This is an official Android 4.4.2 build XXUCNI1 update for Galaxy S4 Active I9295, which means you will lose root as soon as you install this update. You will again have to root Galaxy S4 Active to gain full system access and be able to install root apps again. We will soon do a tutorial on how to root Galaxy S4 Active on Android 4.2 KitKat firmware.

Complete Step-By-Step Instructions:

Step 1 – Download Android 4.4.2 I9295XXUCNI1 for Galaxy S4 Active to your computer and extract the zip file.

Step 2 – Download ODIN v3.09 which will help you to install Android 4.4.2 on Samsung Galaxy S4 Active I9295.

Step 3 – Switch OFF your phone. Now go to Download Mode. How? Press and hold the Volume Down + Home buttons together, and then press the Power button till you see the construction Android robot and a triangle. Press Power again to confirm to enter into Download Mode.

Step 4 – Make sure you have your Galaxy S4 Active USB drivers installed on your computer.

Step 5 – Open ODIN on your computer. Connect your phone to your computer while your phone is in the Download Mode.

Step 6 – If your phone is connected successfully, one of the ID:COM boxes will turn yellow with the COM port number. This step might take some time.

Step 7 – Now select the files that you have to flash/install on your phone. These files are to be found from the extracted files in Step 1.

  • Click on ‘PDA’ and select file with ‘CODE’ in its name.
  • Click on ‘Phone’ and select file with ‘MODEM’ in its name. Ignore this step if there is no such file.
  • Click on ‘CSC’ and select file with CSC’ in its name. Ignore this step if there is no such file.
  • Click on ‘PIT’ and select the .pit file. Ignore this step if there is no such file.

Step 8 – In ODIN, check the Auto Reboot and F. Reset Time options. As for the Re-Partition option, check it ONLY if you selected a .PIT file in the above step.

Step 9 – Now click on the Start button in ODIN. Installation process will start and would take a few minutes to complete.

Step 10 – After the installation is completed, your phone will restart. After you see the home screen, unplug your phone from the computer.

That’s it. Your Samsung Galaxy S4 Active has now been updated to Android 4.4.2 build XXUCNI1 firmware update. Go to Settings > About phone to verify.

Hit +1 or LIKE as a thanks to us!

If you run into any problems, feel free to drop us a comment below and we will reply you back ASAP with the fix or the solution to your problem.

About the author

Taimur Akmal

Devoted writer, enjoys developing code. Appreciates excellent food, exceptional coffee and great company. He is also into sublime design and nicely built cars.

Leave a Comment