Tips & Tutorials

Root XXUDNF2 Android 4.4.2 on Galaxy Note 10.1 N8000 Official Firmware

We recently showed our readers on how they can update Galaxy Note 10.1 N8000 with latest KitKat update and now here is how to root XXUDNF2 Android 4.4.2 firmware. Samsung devices are easy to root due to presence of easy tools. CF-Auto-Root and ODIN will be our choices due to their popularity and simplicity. We would not be taking the long route which involves a custom Recovery. If done right, this guide will have your device rooted under a minute. Before you proceed you should know that your device’s warranty becomes ineligible afterwards. Read our list of the essential root apps available! You can now root XXUDNF2 Android 4.4.2 firmware on Galaxy Note 10.1 N8000 with the tutorial we have given below.

In this tutorial, we will guide you through the entire process of how to root Galaxy Note 10.1 N8000 on Android 4.4.2 XXUDNF2 KitKat official test firmware. Make sure you read our backup tips and some other important tips below that you have to keep in mind before proceeding to the rooting tutorial. ClockworkMod custom recovery is required in order to perform this tutorial. The following tips are important as they will help the rooting procedure to go smooth without any issues. Let’s continue with the tutorial now.

Root XXUDNF2 Android 4.4.2

Disclaimer: All the custom ROMs and firmwares, official software updates, tools, mods or anything mentioned in the tutorial belong to their respective owners/developers. We ( or the developers are not to be held responsible if you damage or brick your device. We don’t have you on gun point to try out this tutorial 😉

Root Galaxy Note 10.1 Android 4.4.2 XXUDNF2 Details:

This is a quick method to root Galaxy Note 10.1 N8000 while on the latest XXUDNF2 Android 4.4.2 KitKat firmware which was released a while ago by Samsung. Make sure you are already on this firmware before proceeding, or you can always install it using our tutorial.

You might also find the following articles interesting:

Samsung Galaxy Note 10.1 USB Drivers

You will need to connect your Android tablet with the computer. For that, please make sure you have installed the Android 4.4.2 USB drivers for Samsung Galaxy Note 10.1 properly. If not, you can download the latest official drivers from our Android USB Drivers section here:

Download Samsung Galaxy Note 10.1 USB drivers!

Backup and Other Important Tips

Done with the USB drivers? Perfect. The tutorial is on the next page, but first, please take a look at the following tips and important points you need to take care of. These are important, as we don’t want anyone losing their personal data or apps:

Always backup your important data that you might need after you install a new custom ROM, an official software update or anything else. Make a backup for just in case, you never know when anything might go wrong. See below for some tips on how to backup data:

Samsung users can also back up data using Samsung KIES. If you backup data manually, you get more options what to choose from and it is very easy to move data across Android devices from different manufacturers, i.e moving Samsung Galaxy Note backup data to HTC One X.

If you already have a custom recovery (ClockworkMod, TWRP etc.) installed on your tablet, we strongly recommend you to also backup using that as it creates a complete image of your existing tablet set up.

A few more optional tips that you should remember:

1. Having problems connecting your Android tablet to the computer? You need to enable USB debugging mode. See here: How to Enable USB Debugging — for Gingerbread, Ice Cream Sandwich and KitKat.

2. Make sure your Android device is charged up to 80-85% battery level. This might help you: How to Check Battery Percentage. Why? Because, if your tablet goes off suddenly while installing a custom ROM, flashing an official firmware update or installing mods etc. — your tablet might get bricked or go dead permanently. No one wants that, right?

4. Most of the tutorials and how-to guides on Team Android are for factory unlocked Android phones and tablets. We recommend NOT to try our guides if your tablet is locked to a carrier, unless we have specified the carrier name or device model.

If you find the above tips useful and they were helpful to you, please consider giving us a +1 or LIKE to thank us!

All set and ready? Good. You can now head over to the next page and root Galaxy Note 10.1 N8000 to XXUDNF2 Android 4.4.2 KitKat firmware.

About the author

Taimur Akmal

Devoted writer, enjoys developing code. Appreciates excellent food, exceptional coffee and great company. He is also into sublime design and nicely built cars.

Leave a Comment