Dynamic Kat ROM is a stock-themed Android 4.4.2 KitKat ROM based on NC2 firmware build. With a goal of being light weight and easy on your battery, we are sure you will be satisfied. Developers have set this ROM up to run smooth the way everybody likes. Hopefully it will fit your needs also. There are also a lot of mods and tweaks that you’ll like to use. If interested in Android 4.4.2 for other phones, check out our new Custom ROMs section. You can update AT&T Galaxy Note 3 N900A to Dynamic Kat Android 4.4.2 KitKat custom firmware using the tutorial below. Your AT&T Galaxy Note 3 N900A should be rooted and have a custom recovery installed. This is not an official release by Samsung, but just a custom ROM which would require a custom recovery in order to flash the ROM zip file on your phone.
As you continue reading below, we will guide you through the entire process of how to install Dynamic Kat Android 4.4.2 KitKat on AT&T Galaxy Note 3 N900A with complete steps. Don’t forget to read all the tips below that you have to keep in mind before proceeding. Please make sure you backup all your data as given below because this tutorial will wipe your data. The following tips are important as they will help the installation procedure to go smooth without any issues. Let’s get to the tutorial now.
Disclaimer: All the custom ROMs and firmwares, official software updates, tools, mods or anything mentioned in the tutorial belong to their respective owners/developers. We (TeamAndroid.com) or the developers are not to be held responsible if you damage or brick your device. We don’t have you on gun point to try out this tutorial 😉
Dynamic Kat Android 4.4.2 KitKat ROM Details:
This amazing Dynamic Kat custom ROM comes with tons of new features and is based on Android 4.4.2 KitKat. A quick list of the main features in Dynamic Kat is given below and we are sure you’d love to use this on your AT&T Galaxy Note 3 N900A:
- N9005 NC2 Based Kit Kat 4.4.2
- Knox is completely removed
- Stock Theme
- Pre-Rooted and Busybox installed
- Init.d support plus scripts for performance
- Touchwiz launcher 5×5 with faster animations / transitions, removed My Magazine, and widgets fit properly.
- All toggles enabled including data and hotspot.
- Wifi tethering including USB and BT
- Usual build.prop tweaks
- 4-way reboot
- Moderately De bloated, Will provide add-on packages as time permits
- Modded MMS for no SMS in call logs
- Call recording built into dialer
- Ink effects with finger ( Must use ripple lock and enable it in the Ink effects app)
- S5 grid view for settings
- Viper4Android baked into ROM
- Custom wallpapers by Carlitos29
- ATT signal icons by Techsilver
- CSC tweaks
- Modified SECSettings to prohibit Wifi stability notifications
- Tweaked WIFI drivers for better reliability
- Theme Chooser added with 1 theme Only works with my 5×5 launcher) ( Go here for more, courtesy of the XNOTE team)
- Unknown sources by default
- USB debugging by default
- Multiwindow modded to 4 windows, no app needed!
- Swipe beta and Google KB with 5th row ( Can be uninstalled)
- Plenty more that i am forgetting
There are tons of useful articles and how-to guides on Team Android for the Samsung AT&T Galaxy Note 3, but we think you might be interested in the following posts:
- Try KitKat on Computer: How to Try and Install Android 4.4.2 KitKat on Computer – Complete Guide.
- Custom ROMs: For a complete collection of Samsung AT&T Galaxy Note 3 custom ROMs, click here!
Like this Dynamic Kat ROM based on the latest Android 4.4.2? We love it too and we know you are looking forward to install it on your phone now. Now please read below for important tips on how to make sure your installation goes smooth and you do not end up with any problems.
Samsung AT&T Galaxy Note 3 USB Drivers
You will need to connect your Android phone with the computer. For that, please make sure you have installed the USB drivers for Samsung AT&T Galaxy Note 3 properly. If not, you can download the latest official drivers from our Android USB Drivers section here:
Backup and Other Important Tips
Done with the USB drivers? Perfect. The tutorial is on the next page, but first, please take a look at the following tips and important points you need to take care of. These are important, as we don’t want anyone losing their personal data or apps:
Always backup your important data that you might need after you install a new custom ROM, an official software update or anything else. Make a backup for just in case, you never know when anything might go wrong. See below for some tips on how to backup data:
- Backup your Apps. How? –> How to Backup Android Apps.
- Backup your SMS messages. How? –> How to Backup/Restore SMS Messages.
- Backup Contacts, Gmail and Google Data. How? –> Sync with Google Sync.
- Backup Call History. How? –> How to Backup Call History.
- Backup WhatsApp Messages. How? –> How to Backup/Restore WhatsApp Messages.
- Backup APN Settings: GPRS, 3G, MMS Settings. How? Note down everything from: Settings > Wireless & Networks (More…) > Mobile networks > Access Point Names.
Samsung users can also back up data using Samsung KIES. If you backup data manually, you get more options what to choose from and it is very easy to move data across Android devices from different manufacturers, i.e moving Samsung Galaxy Note backup data to HTC One X.
If you already have a custom recovery (ClockworkMod, TWRP etc.) installed on your phone, we strongly recommend a backup using that as it creates a complete image of your existing phone set up.
A few more optional tips that you should remember:
1. Having problems connecting your Android phone to the computer? You need to enable USB debugging mode. See here: How to Enable USB Debugging — for Gingerbread, Ice Cream Sandwich, Jelly Bean and KitKat.
2. Make sure your Android device is charged up to 80-85% battery level. This might help you: How to Check Battery Percentage. Why? Because, if your phone goes off suddenly while installing a custom ROM, flashing an official firmware update or installing mods etc. — your phone might get bricked or go dead permanently. No one wants that, right?
4. Most of the tutorials and how-to guides on Team Android are for factory unlocked Android phones and tablets. We recommend NOT to try our guides if your phone is locked to a carrier, unless we have specified the carrier name or device model.
If you find the above tips useful and they were helpful to you, please consider giving us a +1 or LIKE to thank us!
All set and ready? Good. Now, let’s proceed with the tutorial on the next page and update AT&T Galaxy Note 3 N900A to Dynamic Kat Android 4.4.2 KitKat custom firmware.