Tips & Tutorials

Root XXDNB1 Android 4.2.2 on Galaxy Tab 2 10.1 P5110 Jelly Bean Official Firmware

The latest Jelly Bean firmware for the Galaxy Tab 2 10.1 P5110 was released recently and you can now root XXDNB1 Android 4.2.2. Fortunately, we have compiled a working root guide for XXDNB1 Android 4.2.2 firmware as well. As soon as you update your device, your previous root gets disabled, which results in your tablet requiring you to go through the whole root process again. We have made this long frustrating process very easy. We will use CF-Auto-Root and ODIN for this tutorial. We wont require you to install a custom recovery. You can now root XXDNB1 Android 4.2.2 Jelly Bean on Galaxy Tab 2 10.1 P5110 official firmware using the tutorial below. Why should you root? Read: Advantages of rooting an Android device. Make sure you are on the correct firmware build. Go to Settings > About tablet and check.

As you read further, we will guide you through the entire process of how to root Galaxy Tab 2 10.1 P5110 on XXDNB1 Android 4.2.2 official stock firmware using CWM recovery. You need to have CWM recovery installed on your tablet in order to perform this tutorial. Read our list of the essential root apps available! Don’t forget to read all the important tips below that you have to keep in mind before proceeding to the next page. Please backup your data from the tools given below. Let’s continue below to the tutorial. Root XXDNB1

Disclaimer: All the custom ROMs and firmwares, official software updates, tools, mods or anything mentioned in the tutorial belong to their respective owners/developers. We ( or the developers are not to be held responsible if you damage or brick your device. We don’t have you on gun point to try out this tutorial 😉

Root XXDNB1 Android 4.2.2 Firmware Details:

We will be using a root package to root Galaxy Tab 2 10.1 P5110 that will have to be installed using ClockworkMod recovery or any other custom recovery that you want to use. Please make sure, your tablet is on the latest Android 4.2.2 XXDNB1 firmware by going to Settings > About tablet. For those who want to install XXDNB1 Android 4.2.2 Jelly Bean on Galaxy Tab 2 10.1, click here for the tutorial!

Samsung Galaxy Tab 2 10.1 USB Drivers

You will need to connect your Android tablet with the computer. For that, please make sure you have installed the Android 4.0.4 USB drivers for Samsung Galaxy Tab 2 10.1 properly. If not, you can download the latest official drivers from our Android USB Drivers section here:

Download Samsung Galaxy Tab 2 10.1 USB drivers!

Backup and Other Important Tips

Done with the USB drivers? Perfect. The tutorial is on the next page, but first, please take a look at the following tips and important points you need to take care of. These are important, as we don’t want anyone losing their personal data or apps:

Always backup your important data that you might need after you install a new custom ROM, an official software update or anything else. Make a backup for just in case, you never know when anything might go wrong. See below for some tips on how to backup data:

Samsung users can also back up data using Samsung KIES. If you backup data manually, you get more options what to choose from and it is very easy to move data across Android devices from different manufacturers, i.e moving Samsung Galaxy Note backup data to HTC One X. If you already have a custom recovery (ClockworkMod, TWRP etc.) installed on your tablet, we strongly recommend you to also backup using that as it creates a complete image of your existing tablet set up.

A few more optional tips that you should remember:

1. Having problems connecting your Android tablet to the computer? You need to enable USB debugging mode. See here: How to Enable USB Debugging — for Gingerbread, Ice Cream Sandwich and Jelly Bean.

2. Make sure your Android device is charged up to 80-85% battery level. This might help you: How to Check Battery Percentage. Why? Because, if your tablet goes off suddenly while installing a custom ROM, flashing an official firmware update or installing mods etc. — your tablet might get bricked or go dead permanently. No one wants that, right?

3. Most of the tutorials and how-to guides on Team Android are for factory unlocked Android phones and tablets. We recommend NOT to try our guides if your tablet is locked to a carrier, unless we have specified the carrier name or device model.

If you find the above tips useful and they were helpful to you, please consider giving us a +1 or LIKE to thank us! All set and ready? Good. Now, let’s proceed with the tutorial on the next page and root Galaxy Tab 2 10.1 P5110 on XXDNB1 Android 4.2.2 official firmware.

About the author

Taimur Akmal

Devoted writer, enjoys developing code. Appreciates excellent food, exceptional coffee and great company. He is also into sublime design and nicely built cars.

Leave a Comment