Tips & Tutorials

Root XXUAMK1 Android 4.2.2 on Galaxy Tab 3 8.0 T310 Official Firmware

Galaxy Tab3 8.0 recently received a new Jelly Bean firmware update and you can now root XXUAMK1 Android 4.2.2 firmware on Galaxy Tab 3 8.0 T310 – WiFi model. As soon as you update to this firmware, your root will be lost and you would have to root your Android tablet again. We have covered a complete guide on how you can update to this in a separate post. This post will be dedicated to showing you how you can root your device on this very firmware and install latest custom ROMs like Android 4.4.2 KitKat. Doubtful about rooting? Read: Benefits of rooting an Android device. We have found that CF-Auto-Root is the best suited method for this job. With rooting, your warranty would be void. You can now root XXUAMK1 Android 4.2.2 on Galaxy Tab3 8.0 T310 official firmware using the tutorial below.

As you read further, we will guide you through the entire process of how to root Galaxy Tab3 8.0 T310 on XXUAMK1 Android 4.2.2 Jelly Bean official firmware. It is not really necessary, but please make sure you backup your tablet as a precaution and also read all the important tips given below before proceeding to the tutorial. Read our list of the essential root apps available! Let’s continue below to the tutorial.

GALAXY Tab 3 8-inch (1)

Disclaimer: All the custom ROMs and firmwares, official software updates, tools, mods or anything mentioned in the tutorial belong to their respective owners/developers. We (TeamAndroid.com) or the developers are not to be held responsible if you damage or brick your device. We don’t have you on gun point to try out this tutorial 😉

Root Galaxy Tab3 8.0 T310 – CF-Auto-Root Details:

A few important things to note here. CF-Auto-Root method has been only tested on the official Android 4.2.2 Jelly Bean firmwares for the Galaxy Tab3 8.0 T310 — so before you continue, please go to Settings > About device > Model number to confirm you are on the exact model.

You might find these following Galaxy Tab3 8.0 T310 related articles interesting:

For those who do not know about CF-Auto-Root:

CF-Root is the root for “rooting beginners” and those who want to keep as close to stock as possible. CF-Root is meant to be used in combination with stock Samsung firmwares, and be the quickest and easiest way for your first root. A modified recovery and cache partition will be flashed, which will install (only) SuperSU, then clean-up the cache partition and re-flash the stock recovery.

NOTE: Using this root increases your flash counter. You should run Triangle Away after rooting to reset the counter. Note that if you want to run custom kernels or custom recoveries, your flash counter will be set to 1 at every boot. Either configure Triangle Away to reset the counter at every boot (Play version only) or only reset the counter when you need to go into warranty.

Samsung Galaxy Tab3 8.0 USB Drivers

You will need to connect your Android tablet with the computer. For that, please make sure you have installed the Android 4.2.2 USB drivers for Samsung Galaxy Tab3 8.0 properly. If not, you can download the latest official drivers from our Android USB Drivers section here:

Download Samsung Galaxy Tab3 8.0 USB drivers!

Backup and Other Important Tips

Done with the USB drivers? Perfect. The tutorial is on the next page, but first, please take a look at the following tips and important points you need to take care of. These are important, as we don’t want anyone losing their personal data or apps:

Always backup your important data that you might need after you install a new custom ROM, an official software update or anything else. Make a backup for just in case, you never know when anything might go wrong. See below for some tips on how to backup data:

Samsung users can also back up data using Samsung KIES. If you backup data manually, you get more options what to choose from and it is very easy to move data across Android devices from different manufacturers, i.e moving Samsung Galaxy Note backup data to HTC One X.

If you already have a custom recovery (ClockworkMod, TWRP etc.) installed on your tablet, we strongly recommend you to also backup using that as it creates a complete image of your existing tablet set up.

A few more optional tips that you should remember:

1. Having problems connecting your Android tablet to the computer? You need to enable USB debugging mode. See here: How to Enable USB Debugging — for Gingerbread, Ice Cream Sandwich, Jelly Bean and Jelly Bean.

2. Make sure your Android device is charged up to 80-85% battery level. This might help you: How to Check Battery Percentage. Why? Because, if your tablet goes off suddenly while installing a custom ROM, flashing an official firmware update or installing mods etc. — your tablet might get bricked or go dead permanently. No one wants that, right?

4. Most of the tutorials and how-to guides on Team Android are for factory unlocked Android phones and tablets. We recommend NOT to try our guides if your tablet is locked to a carrier, unless we have specified the carrier name or device model.

All set and ready? Good. Now, let’s proceed with the tutorial on the next page and root XXUAMK1 Android 4.2.2 on Galaxy Tab3 8.0 T310 official firmware.

About the author

Taimur Akmal

Devoted writer, enjoys developing code. Appreciates excellent food, exceptional coffee and great company. He is also into sublime design and nicely built cars.

Leave a Comment