Tips & Tutorials

Install XXUANB4 Android 4.4.2 on Galaxy TabPRO 10.1 T520 Firmware Update

How to Update Galaxy TabPRO 10.1 T520 to Android 4.4.2 XXUANB4 KitKat

We have put together a detailed step-by-step instructions guide on how to update Samsung Galaxy Tab 3 to Android 4.4.2 XXUANB4 KitKat. If you are used to installing official updates through ODIN on Samsung Galaxy devices, then this should not be any different for you.

Please read every line carefully and make sure you read the tutorial once before actually performing it on your Android device.

ODIN3 v3.09

To Remember:

  • This Android 4.4.2 XXUANB4 firmware tutorial is only for Samsung Galaxy TabPRO 10.1 T520. Please don’t try this on any other variants of the phone.
  • This is an official firmware by Samsung, not a custom ROM.
  • Make sure you backup all your data in your phone before proceeding.

Rooting Warning: This is an official Android 4.4.2 build XXUANB4 update for Galaxy Tab 3 T520, which means you will lose root as soon as you install this update. You will again have to root Galaxy TabPRO 10.1 to gain full system access and be able to install root apps again. See here: How to Root XXUANB4 Android 4.4.2 on Galaxy TabPRO 10.1 T520 – Complete Tutorial.

Complete Step-By-Step Instructions:

Step 1 – Download Android 4.4.2 T520XXUANB4 for Galaxy TabPRO 10.1 to your computer and extract the zip file.

Step 2 – Download ODIN v3.09 which will help you to install Android 4.4.2 on Samsung Galaxy TabPRO 10.1 T520.

Step 3 – Switch OFF your phone. Now go to Download Mode. How? Press and hold the Volume Up button and then press the Power button together till you see the construction Android robot and a triangle. Press Power again to confirm to enter into Download Mode.

Step 4 – Make sure you have your Galaxy TabPRO 10.1 USB drivers installed on your computer.

Step 5 – Open ODIN on your computer. Connect your phone to your computer while your phone is in the Download Mode.

Step 6 – If your phone is connected successfully, one of the ID:COM boxes will turn yellow with the COM port number. This step might take some time.

Step 7 – Now select the files that you have to flash/install on your phone. These files are to be found from the extracted files in Step 1.

  • Click on ‘PDA’ / ‘AP’ and select file with ‘CODE’ in its name.
  • Click on ‘Phone’ and select file with ‘MODEM’ in its name. Ignore this step if there is no such file.
  • Click on ‘CSC’ and select file with CSC’ in its name. Ignore this step if there is no such file.
  • Click on ‘PIT’ and select the .pit file. Ignore this step if there is no such file.

Step 8 – In ODIN, check the Auto Reboot and F. Reset Time options. As for the Re-Partition option, check it ONLY if you selected a .PIT file in the above step.

Step 9 – Now click on the Start button in ODIN. Installation process will start and would take a few minutes to complete.

Step 10 – After the installation is completed, your phone will restart. After you see the home screen, unplug your phone from the computer.

That’s it. Your Samsung Galaxy Tab 3 has now been updated to Android 4.4.2 build XXUANB4 software update. Go to Settings > About phone to verify.

Hit +1 or LIKE to thank us!

If you run into any problems, feel free to drop us a comment below and we will reply you back ASAP with the fix or the solution to your problem.

About the author

Haris Nadeem

He lives on everything Android; has countless devices, apps and games to play with everyday. Currently serving as the Chief Editor at Team Android.

Leave a Comment