Tips & Tutorials

How to Install Galaxy Note 3 LTE N9005 ClockworkMod Recovery 6 – Complete Guide

HOW TO: Install ClockworkMod Recovery 6 on Galaxy Note 3 LTE N9005

We have put together a detailed step-by-step instructions guide for how to install CWM custom recovery on Galaxy Note 3 LTE N9005. If you are used to installing official updates through ODIN on Samsung Galaxy devices, then this should not be any different for you.

Please read every line carefully and make sure you read the tutorial once before actually performing it on your Android device.

How to Install Galaxy Note 3 LTE N9005 ClockworkMod Recovery 6 - Complete Guide 10

To Remember:

  • This recovery installation tutorial is only for Galaxy Note 3 LTE N9005. Please do not try on any other Galaxy Note 3 variants.
  • Make sure you backup all your data in your phone before proceeding as a precaution.
  • This CWM Recovery tutorial works with Android 4.3, Android 4.3 and all future Android updates as well.
  • For best performance, always stay on the latest firmware update.
  • Hit +1 or LIKE to thank us!

Complete Step-By-Step Instructions:

Step 1 – Download ClockworkMod Recovery 6 for Samsung Galaxy Note 3 to your computer and extract this file anywhere in your computer.

Step 2 – Download ODIN v1.85 which will help you to install CWM Recovery on Samsung Galaxy Note 3 LTE N9005.

Step 3 – Switch OFF your phone. Now go to Download Mode. How? Press and hold the Volume Down + Home buttons together, and then press the Power button till you see the construction Android robot and a triangle. Press Power again to confirm to enter into Download Mode.

Step 4 – Make sure you have your Samsung Galaxy Note 3 USB drivers installed on your computer.

Step 5 – Open ODIN on your computer. Connect your phone to your computer while your phone is in the Download Mode.

Step 6 – If your phone is connected successfully, one of the ID:COM boxes will turn yellow with the COM port number. This step might take some time.

Step 7 – Now select the following file that you have to flash/install on your phone. This file will be found from the extracted file in Step 1.

  • Click on ‘PDA’ and select the file ‘n9005-cwm-recovery-6.0.4.5(1116).tar‘.

Step 8 – In ODIN, check the Auto Reboot and F. Reset Time options, if not already.

Step 9 – Now click on the Start button in ODIN. Installation process will start and would take a few minutes to complete.

Step 10 – After the installation is completed, your phone will reboot into Recovery Mode automatically and install the root package / files. Your ID:COM box will also turn green.

Step 11 – After you see the home screen, unplug your phone from the computer.

That’s it! Your Samsung Galaxy Note 3 has now been flashed with ClockworkMod Recovery. To enter Recovery Mode, shut down phone and then hold down the Home + Volume Up buttons and press the Power button for about 5 seconds to enter Recovery Mode.

Hit +1 or LIKE to thank us!

Whenever you restart your phone, stock recovery keeps showing up? There is a fix for that. For details on how to make ClockworkMod Recovery permanent on your Android phone, head over to the next page.

About the author

Haris Nadeem

He lives on everything Android; has countless devices, apps and games to play with everyday. Currently serving as the Chief Editor at Team Android.

6 Comments

  • DO NOT DELETE the files

    /system/recovery-from-boot.p
    /system/etc/install-recovery.sh

    Your note will fall into a loop and then you will have to flash a stock rom again…

  • sorry guys im new to this i cant get the clocwork mod to install on my phone how do i extract it as when i do its gives me a recovery file and odin doesnt see it thanks

  • Hi guys! After step 9 the phone rebooted but not in Recovery mode and showed the Home Screen. Odin wrote pass and now I cannot access the Recovery Mode at all. After the button combination the screen writes recovery booting set warranty bit recovery

Leave a Comment