Tips & Tutorials

Root KSUGMK1 Android 4.3 on Galaxy S3 SHV-E210S Jelly Bean Official Firmware

We just wrote about the latest Jelly Bean firmware for Samsung Galaxy S3 LTE SHV-E210S (South Korea) and here is a method to root KSUGMK1 Android 4.3 firmware. We have a complete guide on the next page on how to root your phone when on this new firmware update. Why should you root? Read: Benefits of rooting an Android device. ClockworkMod recovery is not needed at all as we will be using ODIN. You can root Galaxy S3 SHV-E210S on KSUGMK1 Android 4.3 Jelly Bean official firmware using the instructions given below.

As you continue reading further, we will guide you through the entire process of how to root KSUGMK1 Android 4.3 on Galaxy S3 SHV-E210S (South Korea) using ODIN. Make sure you backup all your data before trying out the following root method tutorial as a precaution. Rooting has many advantages, but always be cautious with what you do. It will allow you to install root apps on your phone, i.e Titanium Backup and give you full system access. Read our list of the essential root apps available! Let’s continue with the tutorial now.

Samsung Galaxy S III - Pebble Blue

Disclaimer: All the custom ROMs and firmwares, official software updates, tools, mods or anything mentioned in the tutorial belong to their respective owners/developers. We ( or the developers are not to be held responsible if you damage or brick your device. We don’t have you on gun point to try out this tutorial 😉

Root KSUGMK1 Android 4.3 – CF-Root Method:

For those who are not sure about CF-Root, please read the following two paragraphs for a quick intro to the root package:

CF-Root is the root for “rooting beginners” and those who want to keep as close to stock as possible. CF-Root is meant to be used in combination with stock Samsung firmwares, and be the quickest and easiest way for your first root. A modified recovery and cache partition will be flashed, which will install (only) SuperSU, then clean-up the cache partition and re-flash the stock recovery.

NOTE: Using this root increases your flash counter. You should run Triangle Away after rooting to reset the counter. Note that if you want to run custom kernels or custom recoveries, your flash counter will be set to 1 at every boot. Either configure Triangle Away to reset the counter at every boot (Play version only) or only reset the counter when you need to go into warranty.

NOTE: Please make sure that your Samsung Galaxy S3 SHV-E210S is on Android 4.3 firmware, build KSUGMK1, before trying to follow this root tutorial. If you are not, you can always update your phone using the following tutorial:

Samsung Galaxy S3 USB Drivers

You will need to connect your Android phone with the computer. For that, please make sure you have installed the USB drivers for Samsung Galaxy S3 properly. If not, you can download the latest official drivers from our Android USB Drivers section here:

Download Samsung Galaxy S3 USB drivers!

Backup and Other Important Tips

Done with the USB drivers? Perfect. The tutorial is on the next page, but first, please take a look at the following tips and important points you need to take care of. These are important, as we don’t want anyone losing their personal data or apps:

Always backup your important data that you might need after you install a new custom ROM, an official software update or anything else. Make a backup for just in case, you never know when anything might go wrong. See below for some tips on how to backup data:

Samsung users can also back up data using Samsung KIES. If you backup data manually, you get more options what to choose from and it is very easy to move data across Android devices from different manufacturers, i.e moving Samsung Galaxy Note backup data to HTC One X.

If you already have a custom recovery (ClockworkMod, TWRP etc.) installed on your phone, we strongly recommend a backup using that as it creates a complete image of your existing phone set up.

A few more optional tips that you should remember:

1. Having problems connecting your Android phone to the computer? You need to enable USB debugging mode. See here: How to Enable USB Debugging — for Gingerbread, Ice Cream Sandwich and Jelly Bean.

2. Make sure your Android device is charged up to 80-85% battery level. This might help you: How to Check Battery Percentage. Why? Because, if your phone goes off suddenly while installing a custom ROM, flashing an official firmware update or installing mods etc. — your phone might get bricked or go dead permanently. No one wants that, right?

4. Most of the tutorials and how-to guides on Team Android are for factory unlocked Android phones and tablets. We recommend NOT to try our guides if your phone is locked to a carrier, unless we have specified the carrier name or device model.

If you find the above tips useful and they were helpful to you, please consider giving us a +1 or LIKE to thank us!

All set and ready? Good. Now, let’s proceed with the tutorial on then next page and root Samsung Galaxy S3 SHV-E210S on KSUGMK1 Android 4.3 official firmware.

About the author

Haris Nadeem

He lives on everything Android; has countless devices, apps and games to play with everyday. Currently serving as the Chief Editor at Team Android.

Leave a Comment