The latest build of AOKP can now be downloaded for the LG Nitro HD P930 that brings Android 4.2.2 Jelly Bean to your phone with tons of features. AT&T LG Nitro HD P930 was cut off from the new Android updates quite soon, but not to worry since you can now enjoy the latest most Android 4.2.2 update on your phone, all thanks to the Android Open Kang Project (AOKP) team. You can install AOKP Build 6 Android 4.2.2 Jelly Bean on AT&T Nitro HD P930 using our tutorial below.

In this tutorial, we will guide you how to update AT&T LG Nitro HD P930 to AOKP Build 6 Android 4.2.2 Jelly Bean ROM with complete steps. Don’t forget to read all the important tips given below that you have to keep in mind before proceeding to the tutorial on the next page. Make sure you also backup all your data as given since you will have to wipe everything on your phone. The following tips are important as they will help the installation procedure to go smooth without any issues. Let’s continue with the tutorial below.

lg-nitro-hd-att

Disclaimer: All the custom ROMs and firmwares, official software updates, tools, mods or anything mentioned in the tutorial belong to their respective owners/developers. We (TeamAndroid.com) or the developers are not to be held responsible if you damage or brick your device. We don’t have you on gun point to try out this tutorial 😉

AOKP Build 6 Android 4.2.2 Jelly Bean ROM Details:

This amazing AOKP Build 6 custom ROM comes with tons of new features and is based on Android 4.2.2 Jelly Bean. A quick list of the main features in AOKP Build 6 is given below and we are sure you’d love to use this on your LG Nitro HD P930:

  • Fully rEvamped NavBar and Lockscreen UI in ROMControl
  • Themeable lockscreen
  • Scrollable toggleS are back
  • WebGL on the Nexus 10
  • Option to daydream on wireless charger
  • Volume adjusT sound preference
  • Open sOurce Superuser thanks to Koush
  • StatusBar hide toggle
  • Sleep toggle

UPDATE: CM10.1 Milestone 3 ROM is now available for this phone. Read the tutorial here!

LG Nitro HD USB Drivers

You will need to connect your Android phone with the computer. For that, please make sure you have installed the USB drivers for LG Nitro HD properly. If not, you can download the latest official drivers from our Android USB Drivers section here:

Download LG Nitro HD USB drivers!

Backup and Other Important Tips

Done with the USB drivers? Perfect. The tutorial is on the next page, but first, please take a look at the following tips and important points you need to take care of. These are important, as we don’t want anyone losing their personal data or apps:

Always backup your important data that you might need after you install a new custom ROM, an official software update or anything else. Make a backup for just in case, you never know when anything might go wrong. See below for some tips on how to backup data:

If you already have a custom recovery (ClockworkMod, TWRP etc.) installed on your phone, we strongly recommend a backup using that as it creates a complete image of your existing phone set up.

A few more optional tips that you should remember:

1. Having problems connecting your Android phone to the computer? You need to enable USB debugging mode. See here: How to Enable USB Debugging — for Gingerbread, Ice Cream Sandwich and Jelly Bean.

2. Make sure your Android device is charged up to 80-85% battery level. This might help you: How to Check Battery Percentage. Why? Because, if your phone goes off suddenly while installing a custom ROM, flashing an official firmware update or installing mods etc. — your phone might get bricked or go dead permanently. No one wants that, right?

4. Most of the tutorials and how-to guides on Team Android are for factory unlocked Android phones and tablets. We recommend NOT to try our guides if your phone is locked to a carrier, unless we have specified the carrier name or device model.

If you find the above tips useful and they were helpful to you, please consider giving us a +1 or LIKE to thank us!

All set and ready? Good. You can now head over to the next page and install AOKP Build 6 Android 4.2.2 Jelly Bean on your LG Nitro HD P930.

Pages:
1 2
Author

He lives on everything Android; has countless devices, apps and games to play with everyday. Currently serving as the Chief Editor at Team Android.

1 Comment

  1. my lgp930 is hanging after is gets to desktop and reboot within a little time, it continues this often as long as the battery is still charge until the battery goes off completely… i have don hard reset and it still does the same thing…. thanks

Write A Comment