Tips & Tutorials

How to Install ZCALL3 Android 4.1.2 on Galaxy Camera GC100 Jelly Bean Official Firmware

How to Install Android 4.1.2 ZCALL3 on Galaxy Camera GC100

We have put together a detailed step-by-step instructions guide on how to update Samsung Galaxy Camera to Android 4.1.2 ZCALL3 Jelly Bean. If you are used to installing official updates through ODIN on Samsung Galaxy devices, then this should not be any different for you.

Please read every line carefully and make sure you read the tutorial once before actually performing on your device.

How to Install ZCALL3 Android 4.1.2 on Galaxy Camera GC100 Jelly Bean Official Firmware 8

To Remember:

  • This tutorial is only for Samsung Galaxy Camera GC100. Please don’t try this on any other variants of the device.
  • GC100ZCALL3 is an official firmware for the Galaxy Camera GC100.
  • Make sure you backup all your data before proceeding.

Rooting Warning: This is an official Android 4.1.2 build ZCALL3 update for Galaxy Camera GC100, which means you will lose root as soon as you install this update. You will again have to root Galaxy Camera to gain full system access and be able to install root apps again. See here: How to Root Galaxy Camera GC100 on ZCALL3 Android 4.1.2 Official Firmware.

Complete Step-By-Step Instructions:

Step 1 – Download Android 4.1.2 GC100ZCALL3 for Galaxy Camera to your computer and extract the zip file.

Step 2 – Download ODIN v1.85 which will help you to install Android 4.1.2 on Samsung Galaxy Camera.

Step 3 – Switch OFF your camera. Now go to Download Mode. How? Press and hold the Volume Down + Home buttons together, and then press the Power button, till you see the Samsung logo or the construction Android robot and a triangle. This is the Download Mode.

Step 4 – Make sure you have your Galaxy Note USB drivers installed on your computer.

Step 5 – Open ODIN on your computer. Connect your phone to your computer while your phone is in the Download Mode.

Step 6 – If your phone is connected successfully, one of the ID:COM boxes will turn yellow with the COM port number. This step might take some time.

Step 7 – Now select the files that you have to flash/install on your phone. These files are to be found from the extracted files in Step 1.

  • Click on ‘PDA’ and select file with ‘CODE’ in its name.
  • Click on ‘Phone’ and select file with ‘MODEM’ in its name. Ignore this step if there is no such file.
  • Click on ‘CSC’ and select file with CSC’ in its name. Ignore this step if there is no such file.
  • Click on ‘PIT’ and select the .pit file. Ignore this step if there is no such file.

Step 8 – In ODIN, check the Auto Reboot and F. Reset Time options. As for the Re-Partition option, check it ONLY if you selected a .PIT file in the above step.

Step 9 – Now click on the Start button in ODIN. Installation process will start and would take a few minutes to complete.

Step 10 – After the installation is completed, your phone will restart. After you see the home screen, unplug your phone from the computer.

That’s it. Your Samsung Galaxy Camera has now been updated to Android 4.1.2 ZCALL3 software update. Go to Settings > About phone to verify.

Hit +1 or LIKE to thank us!

If you run into any problems, feel free to drop us a comment below and we will reply you back ASAP with the fix or the solution to your problem.

About the author

Haris Nadeem

He lives on everything Android; has countless devices, apps and games to play with everyday. Currently serving as the Chief Editor at Team Android.

Leave a Comment