How to Root Galaxy Tab 2 10.1 P5110 on Android 4.1.1 Jelly Bean Official Firmware
We have put together a detailed step-by-step instructions guide for how to root Android 4.1.1 on Galaxy Tab 2 10.1 P5110. If you are used to installing official updates through ODIN on Samsung Galaxy devices, then this should not be any different for you. Note, this tutorial will not install ClockworkMod recovery.
Please read every line carefully and make sure you read the tutorial once before actually performing it on your Android device.
- This root method tutorial is only for Samsung Galaxy Tab 2 10.1 P5110. Please do not try on any other Galaxy Tab 2 10.1 variants.
- Make sure you backup all your data in your phone before proceeding as a precaution.
- This root method works for both, Android 4.0.4 ICS and Android 4.1.1 JB.
- Your Galaxy Tab 2 10.1 should be on an official firmware by Samsung, not a custom ROM.
Complete Step-By-Step Instructions:
Step 1 – Download Root Package – CF-Auto-Root for Samsung Galaxy Tab 2 10.1 to your computer and extract the zip file.
Step 2 – Download ODIN v1.85 which will help you to root Android 4.1.1 on Samsung Samsung Galaxy Tab 2 10.1 P5110.
Step 3 – Switch OFF your tablet. Now go to Download Mode. How? Press and hold the Volume Up button and then press the Power button together till you see the construction Android robot and a triangle. Press Power again to confirm to enter into Download Mode.
Step 4 – Make sure you have your Samsung Galaxy Tab 2 10.1 USB drivers installed on your computer.
Step 5 – Open ODIN on your computer. Connect your tablet to your computer while your tablet is in the Download Mode.
Step 6 – If your tablet is connected successfully, one of the ID:COM boxes will turn yellow with the COM port number. This step might take some time.
Step 7 – Now select the file that you have to flash/install on your tablet. This file will be found from the extracted file in Step 1.
- Click on ‘PDA’ and select the file ‘CF-Auto-Root-espresso10wifi-espresso10wifixx-gtp5110.zip‘.
Step 8 – In ODIN, check the Auto Reboot and F. Reset Time options, if not already.
Step 9 – Now click on the Start button in ODIN. Installation process will start and would take a few minutes to complete.
Step 10 – After the installation is completed, your tablet will reboot into Recovery Mode automatically and install the root package / files. Your ID:COM box will also turn green.
Step 11 – After you see the home screen, unplug your tablet from the computer.
NOTE: Sometimes the device does NOT boot into Recovery Mode automatically (as given in Step 10) and root your device. If that happens, do the entire procedure again.
OPTIONAL: Still not rooted? Once again perform the entire tutorial, but make sure in ODIN, the “Auto Reboot” option is NOT checked. Then after installation (Step 10), do the following:
Step 11 – Pull out the battery (or keep holding the Power button) to turn OFF the tablet forcefully.
Step 12 – Now boot (turn ON your tablet) with Volume Down + Power buttons to go directly into Recovery Mode manually. This will start the install process of rooting your phone.
That’s it! Your Samsung Galaxy Tab 2 10.1 has now been rooted on Android 4.1.1 / 4.0.4 official software update. Check for the SuperSU app in your apps list to verify.
To make sure you have correctly installed the above root method and it’s working, verify with Root Checker as given in the link.
Hit +1 or LIKE to thank us!
If you run into any problems, feel free to drop us a comment below and we will reply you back ASAP with the fix or the solution to your problem.