Tips & Tutorials

Root KKJLK4 Android 4.1.1 on Galaxy S3 SHV-E210K Official Jelly Bean Firmware

You can now root Galaxy S3 LTE SHV-E210K on KKJLK4 Android 4.1.1 Jelly Bean official firmware which was released earlier today. We have already written about a general tutorial to root Galaxy S3 SHV-E210K on Android 4.0.4 ICS or Android 4.1.1 Jelly Bean firmwares. But, for those who were asking for a firmware specific tutorial, it is now here. And if you want to install this latest official firmware, hit this link! You can root Galaxy S3 SHV-E210K on KKJLK4 Android 4.1.1 Jelly Bean official firmware using the tutorial below.

As you continue reading further, we will guide you through the entire process of how to root KKJLK4 Android 4.1.1 on Samsung Galaxy S3 SHV-E210K using ODIN. Always backup your data before doing anything nasty with your phone. The best part is, to root your Android phone, you do not need to have a custom recovery installed. Let’s continue with the tutorial now.

Samsung Galaxy S III - Pebble Blue

Disclaimer: All the tools, mods or ROMs mentioned below belong to their respective owners/developers. We (TeamAndroid.com) or the developers are not to be held responsible if you damage or brick your device. We don’t have you on gun point to try out this tutorial 😉

About CF-Auto-Root:

CF-Root is the root for “rooting beginners” and those who want to keep as close to stock as possible. CF-Root is meant to be used in combination with stock Samsung firmwares, and be the quickest and easiest way for your first root. A modified recovery and cache partition will be flashed, which will install (only) SuperSU, then clean-up the cache partition and re-flash the stock recovery.

NOTE: Using this root increases your flash counter. You should run Triangle Away after rooting to reset the counter. Note that if you want to run custom kernels or custom recoveries, your flash counter will be set to 1 at every boot. Either configure Triangle Away to reset the counter at every boot (Play version only) or only reset the counter when you need to go into warranty.

Make sure you have installed all your USB drivers for the Samsung Galaxy S III to connect it with the computer. Download Samsung Samsung Galaxy S3 USB drivers! Apart from just the USB drivers, there are a few more things that you need to take care of.

1. You need to enable USB debugging mode. This helps to connect your Android phone with the PC. See here: How to Enable USB Debugging.

2. Your phone battery should be 80-85% charged. If your phone goes off suddenly because of battery, during flashing ROMs or installing mods and updates — your phone might go dead permanently. See here: How to Check Battery Percentage.

3. Backup all your important data that you might need as soon as your flash a new ROM, or make a backup for just in case, you never know when anything might go wrong. See below on how to backup data:

Data can also be backed up using Samsung KIES for their devices, but if you backup data manually, you get more options what top choose from and it is very easy to move data across Android devices from different manufacturers, i.e moving Samsung Galaxy Note backup data to HTC One X.

4. Your phone should be factory unlocked. Additional instructions for locked Android devices will be added in the tutorial for unlocking devices.

Now, let’s proceed with the tutorial on the next page and root Samsung Galaxy S3 SHV-E210K on KKJLK4 Android 4.1.1 official firmware.

About the author

Haris Nadeem

He lives on everything Android; has countless devices, apps and games to play with everyday. Currently serving as the Chief Editor at Team Android.

Leave a Comment