How to Update Galaxy Tab 2 (10.1) P5110 to Android 4.0.4 XXBLH4 ICS
We have put together a detailed step-by-step instructions guide on how to update Samsung Galaxy S Tab 2 to Android 4.0.4 XXBLH4 ICS. If you are used to installing official updates through ODIN on Samsung Galaxy devices, then this should not be any different for you.
Please read every line carefully and make sure you read the tutorial once before actually performing it on your Android device.
- This Android 4.0.4 XXBLH4 firmware tutorial is only for Samsung Galaxy Tab 2 (10.1) P5110. Please don’t try this on any other variants of the phone.
- This tutorial will wipe out all your data.
- Make sure you backup all your data in your phone before proceeding.
Rooting Warning: This is an official Android 4.0.4 build XXBLH4 update for Galaxy Tab 2 P5110, which means you will lose root as soon as you install this update. You will again have to root Galaxy Tab 2 (10.1) to gain full system access and be able to install root apps again. See here: How to Root Galaxy Tab 2 10.1 P5110 on Android 4.0.4 XXBLH4 Official Firmware.
Complete Step-By-Step Instructions:
Step 1 – Download Android 4.0.4 P5110XXBLH4 for Galaxy Tab 2 (10.1) to your computer and extract the zip file.
Step 2 – Download ODIN v1.85 which will help you to install Android 4.0.4 on Samsung Galaxy Tab 2 (10.1) P5110.
Step 3 – Switch OFF your tablet. Now go to Download Mode. How? Press and hold the Volume Up button and then press the Power button together till you see the construction Android robot and a triangle. Press Power again to confirm to enter into Download Mode.
Step 4 – Make sure you have your Galaxy Tab 2 (10.1) USB drivers installed on your computer.
Step 5 – Open ODIN on your computer. Connect your tablet to your computer while it is in the Download Mode.
Step 6 – If your tablet is connected successfully, one of the ID:COM boxes will turn yellow with the COM port number. This step might take some time.
Step 7 – Now select the files that you have to flash/install on your tablet. These files are to be found from the extracted files in Step 1.
- Click on ‘PDA’ and select file with ‘CODE’ in its name.
- Click on ‘Phone’ and select file with ‘MODEM’ in its name. Ignore this step if there is no such file.
- Click on ‘CSC’ and select file with CSC’ in its name. Ignore this step if there is no such file.
- Click on ‘PIT’ and select the .pit file. Ignore this step if there is no such file.
Step 8 – In ODIN, check the Auto Reboot and F. Reset Time options. As for the Re-Partition option, check it ONLY if you selected a .PIT file in the above step.
Step 9 – Now click on the Start button in ODIN. Installation process will start and would take a few minutes to complete.
Step 10 – After the installation is completed, your phone will restart. After you see the home screen, unplug your phone from the computer.
That’s it. Your Samsung Galaxy Tab 2 10.1 has now been updated to Android 4.0.4 build XXBLH4 software update. Go to Settings > About phone to verify.
Hit +1 or LIKE to thank us!
If you run into any problems, feel free to drop us a comment below and we will reply you back ASAP with the fix or the solution to your problem.