Tips & Tutorials

How to Install DCLR6 Android 4.0.4 on Galaxy Note N7000B Official Firmware

Samsung Galaxy Note N7000B has just received the latest build DCLR6 of Android 4.0.4 in Thailand. Not sure what changes this new firmware update has brought, but you can download it off Samsung KIES or simply install and update Galaxy Note N7000B to Android 4.0.4 DCLR6 using the manual tutorial below.

As you read further, we will guide you through the entire process of how to update Galaxy Note N7000B to Android 4.0.4 DCLR6 (July 2012 – Thailand, Greece) official firmware using ODIN. Be warned, that this tutorial will wipe all your existing installed apps and personal settings. Please backup your data from the tools given below.

How to Install DCLR6 Android 4.0.4 on Galaxy Note N7000B Official Firmware 7

Disclaimer: All the tools, mods or ROMs mentioned below belong to their respective owners/developers. We ( or the developers are not to be held responsible if you damage or brick your device. We don’t have you on gun point to try out this tutorial 😉

Android 4.0.4 DCLR6 Firmware Details:

Version: 4.0.4
Date: 2012-07-31
Regions: Cyprus, Greece

Make sure you have installed all your USB drivers for the Samsung Galaxy Note to connect it with the computer. Download Samsung Galaxy Note USB drivers! Apart from just the USB drivers, there are a few more things that you need to take care of.

1. You need to enable USB debugging mode. This helps to connect your Android phone with the PC. See here: How to Enable USB Debugging.

2. Your phone battery should be 80-85% charged. If your phone goes off suddenly because of battery, during flashing ROMs or installing mods and updates — your phone might go dead permanently. See here: How to Check Battery Percentage.

3. Backup all your important data that you might need as soon as your flash a new ROM, or make a backup for just in case, you never know when anything might go wrong. See below on how to backup data:

Data can also be backed up using Samsung KIES for their devices, but if you backup data manually, you get more options what top choose from and it is very easy to move data across Android devices from different manufacturers, i.e moving Samsung Galaxy S3 backup data to HTC One X.

4. Your phone should be factory unlocked. Additional instructions for locked Android devices will be added in the tutorial for unlocking devices.

Now, let’s proceed with the tutorial below and update Galaxy Note N7000B to DCLR6 Android 4.0.4 (July 2012 for Thailand) ICS firmware.

How to Install DCLR6 Android 4.0.4 on Galaxy Note N7000B Official Firmware 8

How to Update Galaxy Note N7000B to Android 4.0.4 DCLR6 ICS

We have put together a detailed step-by-step instructions guide on how to update Samsung Galaxy Note to Android 4.0.4 DCLR6 ICS. If you are used to installing official updates through ODIN on Samsung Galaxy devices, then this should not be any different for you.

Please read every line carefully and make sure you read the tutorial once before actually performing it on your Android device.

To Remember:

  • This tutorial is only for Samsung Galaxy Note N7000B. Please don’t try this on any other variants of the phone.
  • This tutorial will wipe out all your data.
  • Make sure you backup all your data in your phone before proceeding.

Rooting Warning: This is an official Android 4.0.4 DCLR6 update for Galaxy Note N7000B, which means you will lose root as soon as you install this update . You will again have to root Galaxy Note to gain full system access and be able to install root apps again. We will post a full tutorial on how to root Galaxy Note N7000B on 4.0.4 ICS soon.

Complete Step-By-Step Instructions:

Step 1 – Download Android 4.0.4 N7000BDCLR6 for Galaxy Note to your computer and extract the zip file.

Step 2 – Download ODIN v1.85 which will help you to install Android 4.0.3 on Samsung Galaxy Note N7000B.

Step 3 – Switch off your phone. Now go to Download Mode. How? Press and hold the Volume Down + Home buttons together, and then press the Power button, till you see the Samsung logo or the construction Android robot and a triangle. This is the Download Mode.

Step 4 – Make sure you have your Galaxy Note USB drivers installed on your computer.

Step 5 – Open ODIN on your computer. Connect your phone to your computer while your phone is in the Download Mode.

Step 6 – If your phone is connected successfully, one of the ID:COM boxes will turn yellow with the COM port number. This step might take some time.

Step 7 – Now select the files that you have to flash/install on your phone. These files are to be found from the extracted files in Step 1.

  • Click on ‘PDA’ and select file with ‘CODE’ in its name.
  • Click on ‘Phone’ and select file with ‘MODEM’ in its name. Ignore this step if there is no such file.
  • Click on ‘CSC’ and select file with CSC’ in its name. Ignore this step if there is no such file.
  • Click on ‘PIT’ and select the .pit file. Ignore this step if there is no such file.

Step 8 – In ODIN, check the Auto Reboot and F. Reset Time options. As for the Re-Partition option, check it ONLY if you selected a .PIT file in the above step.

Step 9 – Now click on the Start button in ODIN. Installation process will start and would take a few minutes to complete.

Step 10 – After the installation is completed, your phone will restart. After you see the home screen, unplug your phone from the computer.

That’s it. Your Samsung Galaxy Note has now been updated to Android 4.0.4 DCLR6 software update. Go to Settings > About phone to verify.

If you run into any problems, feel free to drop us a comment below and we will reply you back ASAP with the fix or the solution to your problem.

About the author

Haris Nadeem

He lives on everything Android; has countless devices, apps and games to play with everyday. Currently serving as the Chief Editor at Team Android.

Leave a Comment