Update Galaxy Note N7000 to JonROM V5 DXLSE Android 4.1.2 Jelly Bean Custom Firmware

• Last modified: Tips

JonROM V5 DXLSE is a custom ROM based on Android 4.1.2 Jelly bean for Galaxy Note N7000. This ROM includes all the Galaxy S4 sounds, notifications and alarm sounds. The UI is from Galaxy S4’s TouchWiz which makes it even more appealing to use on your Galaxy Note. Overall, JonROM works really smooth and is highly optimized for this Android phone. If interested in Android 4.1.2 for other phones, check out our new Custom ROMs section. You can update Galaxy Note N7000 to JonROM V5 DXLSE Android 4.1.2 Jelly Bean custom firmware using the tutorial below. This is not an official release by Samsung, but just a custom ROM which would require a custom recovery like ClockworkMod in order to flash the ROM zip file on your phone.

In this tutorial, we will guide you through the process of how to install JonROM V5 DXLSE Android 4.1.2 Jelly Bean on Galaxy Note N7000 with complete steps. Please backup your data as this tutorial will wipe everything from your Galaxy Note using CWM recovery just like you ahve to do before installing a custom ROM. Also don’t forget to keep the important tips below in mind before proceeding. The following tips are important as they will help the installation procedure to go smooth without any issues. Let’s get to the tutorial now.

RAAAAL6N_EG4TSviVRH2jlCw82tLtd2f_K2XPe0fqL66WjOAKy4CCe7LwPkJ-sMMYzNRQfukTo6LoQ6XxvsgPZNfitX8wc7gyZOG8a_O1ryB51U5AJtU9VCBI1W3mHvKQvxaQpfRPlE_nf_wRQ

Disclaimer: All the custom ROMs and firmwares, official software updates, tools, mods or anything mentioned in the tutorial belong to their respective owners/developers. We (TeamAndroid.com) or the developers are not to be held responsible if you damage or brick your device. We don’t have you on gun point to try out this tutorial ;-)

JonROM V5 DXLSE Android 4.1.2 Jelly Bean ROM Details:

This amazing JonROM V5 DXLSE custom ROM comes with tons of new features and is based on Android 4.1.2 Jelly Bean. A quick list of the main features in JonROM V5 DXLSE is given below and we are sure you’d love to use this on your Galaxy Note N7000:

  • Base official JB DXLSE
  • Deodexed, zipaligned and rooted
  • Modem DXLS8 STOCK OF THE ROM
  • 4 way reboot options
  • SMS recipient limit is set to 200.
  • Auto convert SMS to MMS is disabled.
  • Permanent disabling of SMS, MMS, and Email log in call log
  • SMS per hour sending limit is increased to 1000 SMS per hour
  • Call record is enabled.
  • Ascending ringtone is disabled.
  • Smart Rotation is enabled.
  • Lockscreen Shortcuts is enabled
  • Lockscreen information ticker is enabled
  • Fully functioning airview for SecGallery and VideoPlayer and partially for SPlanner.
  • Multiwindow for unlimited apps.
  • Shutter camera sound on/off option.
  • Camera focusing sound is disabled.
  • All camera battery restrictions are removed
  • Ink effect color changer
  • Build.prop and init.d tweaks and optimizations
  • CSC Changed to BTU to Lockscreen shortcurts
  • Galaxy S4 sounds (alarms, notifications, UI, ringtones)

There are tons of useful articles and how-to guides on Team Android for the Samsung Galaxy Note, but we think you might be interested in the following posts:

Like this JonROM V5 DXLSE ROM based on the latest Android 4.1.2? We love it too and we know you are looking forward to install it on your phone now. Now please read below for important tips on how to make sure your installation goes smooth and you do not end up with any problems.

Samsung Galaxy Note USB Drivers

You will need to connect your Android phone with the computer. For that, please make sure you have installed the USB drivers for Samsung Galaxy Note properly. If not, you can download the latest official drivers from our Android USB Drivers section here:

Download Samsung Galaxy Note USB drivers!

Backup and Other Important Tips

Done with the USB drivers? Perfect. The tutorial is on the next page, but first, please take a look at the following tips and important points you need to take care of. These are important, as we don’t want anyone losing their personal data or apps:

Always backup your important data that you might need after you install a new custom ROM, an official software update or anything else. Make a backup for just in case, you never know when anything might go wrong. See below for some tips on how to backup data:

Samsung users can also back up data using Samsung KIES. If you backup data manually, you get more options what to choose from and it is very easy to move data across Android devices from different manufacturers, i.e moving Samsung Galaxy Note backup data to HTC One X.

If you already have a custom recovery (ClockworkMod, TWRP etc.) installed on your phone, we strongly recommend a backup using that as it creates a complete image of your existing phone set up.

A few more optional tips that you should remember:

1. Having problems connecting your Android phone to the computer? You need to enable USB debugging mode. See here: How to Enable USB Debugging — for Gingerbread, Ice Cream Sandwich and Jelly Bean.

2. Make sure your Android device is charged up to 80-85% battery level. This might help you: How to Check Battery Percentage. Why? Because, if your phone goes off suddenly while installing a custom ROM, flashing an official firmware update or installing mods etc. — your phone might get bricked or go dead permanently. No one wants that, right?

4. Most of the tutorials and how-to guides on Team Android are for factory unlocked Android phones and tablets. We recommend NOT to try our guides if your phone is locked to a carrier, unless we have specified the carrier name or device model.

If you find the above tips useful and they were helpful to you, please consider giving us a +1 or LIKE to thank us!

All set and ready? Good. Now, let’s proceed with the tutorial on the next page and update Galaxy Note N7000 to JonROM V5 DXLSE Android 4.1.2 Jelly Bean custom firmware.

HOW TO: Install JonROM V5 DXLSE Android 4.1.2 Jelly Bean on Samsung Galaxy Note N7000

We have put together a detailed step-by-step instructions guide on how to install JonROM V5 DXLSE Android 4.1.2 Jelly Bean custom firmware on Galaxy Note N7000. If you are used to installing custom ROMs on your Galaxy Note N7000, then this should not be any different for you.

However, for beginners, you need to root your Samsung Galaxy Note and install a custom recovery. Please Google that up if you are unsure and make sure you read the tutorial once before actually performing it on your device.

Samsung Galaxy Note N7000 - JonROM V5 DXLSE Android 4.1.2 Jelly Bean

To Remember:

  • This tutorial is only for installing JonROM V5 DXLSE Android 4.1.2 ROM on Samsung Galaxy Note N7000. Please do not try on any other Galaxy Note variants.
  • Your phone should be rooted and have ClockworkMod recovery installed from before.
  • This tutorial will wipe out all your data. Proceed at your own risk.
  • Perform a Dalvik Cache wipe before proceeding from the recovery mode.
  • Samsung KIES will NOT detect your phone after installing this ROM because it is a custom firmware.
  • Make sure you backup all your data in your phone before proceeding.

Complete Step-By-Step Instructions:

Step 1 - Download JonROM V5 DXLSE Android 4.1.2 ROM for Galaxy Note to your computer.

Step 2 - Connect and mount your Galaxy Note USB memory on your computer using the USB cable.

Step 3 - Now copy/paste the downloaded Android 4.1.2 ROM zip file to your SD card. Make sure the file is in the SD card root (not in any folder).

Step 4 - Then turn OFF your phone and disconnect from the USB cable.

Step 5 - Now to get in the Recovery Mode. Switch ON the phone while pressing and holding Volume Up + Home + Power buttons together. Alternatively, read this: How to Enter Recovery Mode on Any Android Phone.

ROM-Install-CWM-Recovery-5

NOTE: Screenshots of the ClockworkMod Recovery may change as new versions are released.

Step 6 - Once you are in ClockworkMod Recovery, select perform a full data wipe by selecting “wipe data/factory reset” as shown below. Use the Power button to select everything while in the Recovery Mode.

ROM-Install-CWM-Recovery-1

Step 7 - Then, perform a cache wipe by selecting “wipe cache partition” as you can see in the image below.

ROM-Install-CWM-Recovery-2

Step 8 - Now this is optional, but it is recommended to perform a wipe of your dalvik cache as well. You will not get into boot loops or any other errors. From CWM recovery, go to ‘advanced’ and then select “wipe dalvik cache”.

ROM-Install-CWM-Recovery-3

Step 9 - Then go back to the main recovery screen and select “install zip from SD card”.

Step 10 - Now select “choose zip from sdcard”. Using your volume keys, navigate to the Android 4.1.2 ROM zip file that you copied to your SD card and select it using the Power button. Confirm the installation on the next screen and the installation procedure should start now.

Step 11 - After the installation completes, go to “+++++Go Back+++++” and reboot the phone by selecting “reboot system now” from the recovery menu as show below.

ROM-Install-CWM-Recovery-5

Your Galaxy Note N7000 will boot now and it might take about 5 minutes to boot on your first time. So, please wait.

That’s it! Your Galaxy Note should now have JonROM V5 DXLSE Android 4.1.2 Jelly Bean custom ROM installed on your phone! Go to Settings > About phone to verify.

Hit +1 or LIKE to thank us!

If you run into any problems, feel free to drop us a comment below and we will reply you back ASAP with the fix or the solution to your problem.