Root XXCLK7 Android 4.1.1 on Galaxy Tab 2 7.0 P3110 Jelly Bean Official Firmware with CF-Root

Last updated on
by in Android Tips
     

After P3100 today, the complete tutorial to root XXCLK7 Android 4.1.1 official firmware for the Galaxy Tab 2 7.0 P3110 (WiFi only) is now available with us using CF-Root method. For those asking on how to root Galaxy Tab 2 7.0, you have come to right place as we now have a complete tutorial. Why should you root? Read: Advantages of rooting an Android device. You do not need to have ClockworkMod recovery installed as we will be using ODIN. This root tutorial method works on Galaxy Tab 2 7.0 P3110 with XXCLK7 Android 4.1.1 Jelly Bean. You can now root XXCLK7 Android 4.1.1 Jelly Bean on Galaxy Tab 2 7.0 P3110 official firmware using the tutorial below.

As you read further, we will guide you through the entire process of how to root Galaxy Tab 2 7.0 P3110 on XXCLK7 Android 4.1.1 official stock firmware. It is not really necessary, but please make sure you backup your tablet and also read all the important tips given below before proceeding to the tutorial. Read our list of the essential root apps available! Please note, CWM Recovery will not be installed with this root package. — only SuperSU and root binary will be installed. Let’s continue below to the tutorial.

Root XXCLK7

Disclaimer: All the custom ROMs and firmwares, official software updates, tools, mods or anything mentioned in the tutorial belong to their respective owners/developers. We (TeamAndroid.com) or the developers are not to be held responsible if you damage or brick your device. We don’t have you on gun point to try out this tutorial ;-)

Root XXCLK7 Android 4.1.1 Jelly Bean – CF-Auto-Root Details:

For those who do not know about CF-Auto-Root:

CF-Root is the root for “rooting beginners” and those who want to keep as close to stock as possible. CF-Root is meant to be used in combination with stock Samsung firmwares, and be the quickest and easiest way for your first root. A modified recovery and cache partition will be flashed, which will install (only) SuperSU, then clean-up the cache partition and re-flash the stock recovery.

NOTE: Using this root increases your flash counter. You should run Triangle Away after rooting to reset the counter. Note that if you want to run custom kernels or custom recoveries, your flash counter will be set to 1 at every boot. Either configure Triangle Away to reset the counter at every boot (Play version only) or only reset the counter when you need to go into warranty.

Make sure, you are on the XXCLK7 Android 4.1.1 firmware on your Galaxy Tab 2 7.0 tablet. How? Read this here: How to Update Galaxy Tab 2 7.0 P3110 to XXCLK7 Android 4.1.1 Jelly Bean Official Firmware.

Samsung Galaxy Tab 2 7.0 USB Drivers

You will need to connect your Android tablet with the computer. For that, please make sure you have installed the Android 4.0.4 USB drivers for Samsung Galaxy Tab 2 7.0 properly. If not, you can download the latest official drivers from our Android USB Drivers section here:

Download Samsung Galaxy Tab 2 7.0 USB drivers!

Backup and Other Important Tips

Done with the USB drivers? Perfect. The tutorial is on the next page, but first, please take a look at the following tips and important points you need to take care of. These are important, as we don’t want anyone losing their personal data or apps:

Always backup your important data that you might need after you install a new custom ROM, an official software update or anything else. Make a backup for just in case, you never know when anything might go wrong. See below for some tips on how to backup data:

Samsung users can also back up data using Samsung KIES. If you backup data manually, you get more options what to choose from and it is very easy to move data across Android devices from different manufacturers, i.e moving Samsung Galaxy Note backup data to HTC One X.

If you already have a custom recovery (ClockworkMod, TWRP etc.) installed on your tablet, we strongly recommend you to also backup using that as it creates a complete image of your existing tablet set up.

A few more optional tips that you should remember:

1. Having problems connecting your Android tablet to the computer? You need to enable USB debugging mode. See here: How to Enable USB Debugging — for Gingerbread, Ice Cream Sandwich and Jelly Bean.

2. Make sure your Android device is charged up to 80-85% battery level. This might help you: How to Check Battery Percentage. Why? Because, if your tablet goes off suddenly while installing a custom ROM, flashing an official firmware update or installing mods etc. — your tablet might get bricked or go dead permanently. No one wants that, right?

4. Most of the tutorials and how-to guides on Team Android are for factory unlocked Android phones and tablets. We recommend NOT to try our guides if your tablet is locked to a carrier, unless we have specified the carrier name or device model.

If you find the above tips useful and they were helpful to you, please consider giving us a +1 or LIKE to thank us!

All set and ready? Good. Now, let’s proceed with the tutorial on the next page and root Galaxy Tab 2 7.0 P3110 on XXCLK71 Android 4.1.1 official firmware.


  • http://www.facebook.com/people/Duda-Quevedo/100000613873237 Duda Quevedo

    I am Brazilian, I did the procedure and it worked first, thank you

  • http://www.facebook.com/noriel.omao Noriel Omao

    in no.10
    what root package ?

  • DUDE LEBOWSKI

    DOES THIS WORK ON 3113? WITH THE SAME COMPILATION?