Update Galaxy Y Pro B5510 to XXLH3 Android 2.3.6 Offiical Firmware

Last updated on
by in Android Tips
     

After the Galaxy Y Pro Duos, here is our very first tutorial for Galaxy Y Pro B5510 as well. You can now install XXLH3 Android 2.3.6 on Galaxy Y Pro which is now available for download. This firmware was released for several regions over Samsung KIES, but for those who were not able to download the new software update, can grab the full download with tutorial from this article. You can easily install XXLH3 Android 2.3.6 on Galaxy Y Pro B5510 using our tutorial below.

As you read further, we will guide you through the entire process of how to update Galaxy Y Pro B5510 to Android 2.3.6 XXLH3 official firmware using ODIN, the flashing tool for Samsung devices. Make sure you backup all your data from the tips and tools given below before proceeding as a precaution. This firmware is completely unbranded and is available for all unlocked Galaxy Y Pro B5510. Let’s continue with the tutorial below.

Disclaimer: All the tools, mods or ROMs mentioned below belong to their respective owners/developers. We (TeamAndroid.com) or the developers are not to be held responsible if you damage or brick your device. We don’t have you on gun point to try out this tutorial ;-)

This ROM is completely stock with no third-party changes or apps included in it. You can use this firmware to unroot your Android device with the official update.

Android 2.3.6 XXLH3 Firmware Details:

PDA: B5510XXLH3
CSC: B5510OXALH4
Version:
Date: 2012-10-04
Regions: Austria, Belgium, France, Germany, Hungary, Italy, Spain, United Kingdom

Make sure you have installed all your USB drivers for the Samsung Galaxy Y Pro to connect it with the computer. Download Samsung Galaxy Y Pro USB drivers! Apart from just the USB drivers, there are a few more things that you need to take care of.

1. You need to enable USB debugging mode. This helps to connect your Android phone with the PC. See here: How to Enable USB Debugging.

2. Your phone battery should be 80-85% charged. If your phone goes off suddenly because of battery, during flashing ROMs or installing mods and updates — your phone might go dead permanently. See here: How to Check Battery Percentage.

3. Backup all your important data that you might need as soon as your flash a new ROM, or make a backup for just in case, you never know when anything might go wrong. See below on how to backup data:

Data can also be backed up using Samsung KIES for their devices, but if you backup data manually, you get more options what top choose from and it is very easy to move data across Android devices from different manufacturers, i.e moving Samsung Galaxy Note backup data to HTC One X.

4. Your phone should be factory unlocked. Additional instructions for locked Android devices will be added in the tutorial for unlocking devices.

Now, let’s proceed with the tutorial on the next page and install Android 2.3.6 XXLH3 firmware on Galaxy Y Pro B5510.


  • Pingback: Install Galaxy Y Pro B5510 JPLI1 Android 2.3.6 Offiical Firmware [How To] - Tutorial / Guide | Team Android

  • Anu

    Added!!

    Enter CS for MD5..

    Check MD5.. Do not unplug the cable..

    Please wait..

    B5510XXLH3_B5510OXALH4_B5510XXLH3_HOME.tar.md5 is valid.

    Checking MD5 finished Sucessfully..

    Leave CS..

    Odin v.3 engine (ID:6)..

    File analysis..

    SetupConnection..

    Initialzation..

    Get PIT for mapping..

    Firmware update start..

    sbl.bin

    NAND Write Start!!

    BcmCP.img

    Complete(Write) operation failed.

    All threads completed. (succeed 0 / failed 1)

    Removed!!

    Added!!

  • Anu

    i havw many trys bt

  • jpstr321

    it says (succeed 0 / failed 0) or (succeed 0 / failed 1)… what am i doing wrong?