How to Install Galaxy Y S5360 DXLJ1 Android 2.3.6 Stock Firmware

Last updated on
by in Android Tips
     

DXLJ1 Android 2.3.6 official firmware update is now available for download for the Galaxy Y S5360 Android phone. This firmware update is part of the October 2012 firmwares that have been released by Samsung over Samsung KIES. For those who were not able to download the new software update, can grab the full download with tutorial from this article. You can easily install DXLJ1 Android 2.3.6 on Galaxy Y S5360 using our tutorial below.

As you read further, we will guide you through the entire process of how to update Galaxy Y S5360 to Android 2.3.6 DXLJ1 official firmware using ODIN. Make sure you backup all your data from the tips and tools given below before proceeding as a precaution. This firmware is completely unbranded and is available all unlocked Galaxy Y S5360. Let’s continue with the tutorial below.

Disclaimer: All the tools, mods or ROMs mentioned below belong to their respective owners/developers. We (TeamAndroid.com) or the developers are not to be held responsible if you damage or brick your device. We don’t have you on gun point to try out this tutorial ;-)

This ROM is completely stock with no third-party changes or apps included in it. You can use this firmware to unroot your Android device with the official update.

Android 2.3.6 DXLJ1 Firmware Details:

PDA: S5360DXLJ1
CSC: S5360XXVLJ2
Version: 2.3.6
Date: 2012-10-16
Regions: Indonesia, Malaysia, Philippines, Singapore, Vietnam

Make sure you have installed all your USB drivers for the Samsung Galaxy Y to connect it with the computer. Download Samsung Galaxy Y USB drivers! Apart from just the USB drivers, there are a few more things that you need to take care of.

1. You need to enable USB debugging mode. This helps to connect your Android phone with the PC. See here: How to Enable USB Debugging.

2. Your phone battery should be 80-85% charged. If your phone goes off suddenly because of battery, during flashing ROMs or installing mods and updates — your phone might go dead permanently. See here: How to Check Battery Percentage.

3. Backup all your important data that you might need as soon as your flash a new ROM, or make a backup for just in case, you never know when anything might go wrong. See below on how to backup data:

Data can also be backed up using Samsung KIES for their devices, but if you backup data manually, you get more options what top choose from and it is very easy to move data across Android devices from different manufacturers, i.e moving Samsung Galaxy Note backup data to HTC One X.

4. Your phone should be factory unlocked. Additional instructions for locked Android devices will be added in the tutorial for unlocking devices.

Now, let’s proceed with the tutorial on the next page and install Android 2.3.6 DXLJ1 firmware on Galaxy Y S5360.


  • Jeff

    I softbricked my SGY last day by installing from Creed’s ROM to JB’s ROM, and I 4got to flash it to stock, can I use this method to unbrick it? Reply asap tnx GBU .

    • http://www.sizzledcore.com Haris Nadeem

      Yes, you can.

      • Jeff

        I am downloading it now. Hope it will work ;D

  • Jeff

    I can’t find a file with ‘CODE’ in its name.

    • http://www.sizzledcore.com Haris Nadeem

      What files do you see in the zip file?

      • jeff

        still not working. I cant find the file with ”CODE” in its name.. I extracted it already. pls help reply asap

        • menyok

          hey haris, u have to use splitfus

          • Jeff

            how to use it?

          • Jeff

            how to use it?

          • Jeff

            how to use it?

          • Jeff

            how to use it?

      • jeff

        S5360DXLJ1_S5360XXVLJ2_S5360DXLI1_HOME.tar.md5

        That was the only file I can see when I click PDA or either any of the PIT or PHONEo r CSC .

        • http://www.sizzledcore.com Haris Nadeem

          Yes, this is the file. Click on PDA and select this “S5360DXLJ1_S5360XXVLJ2_S5360DXLI1_HOME.tar.md5″ file. Flash it according to rest of the instructions :)

          • Jeff

            how about the PIT, PHONE and CSC? What file should I put on them?

          • http://www.sizzledcore.com Haris Nadeem

            Nothing. Leave them blank.

          • jeff

            nothing happened :’(

          • jeff

            it stucked with setupConnection.. :’(

      • jeff

        pls help me

  • doodz

    why always failed using odin?

  • sumam

    I have install jellybean
    V3 now I want to come back my 2.3.6 Android version.
    mail me madeatvillage@Gmail.com

  • Stephen Aguillon

    i have install Aurora v2 – Vanilla now i want to come back my 2.3.6 android version. mail me stephenjohnaguillon@gmail.com tnx.

  • http://www.facebook.com/kamran.shaikh.9 Kamran Shaikh

    Can this firmware detected by kies ,this is official firmware????? bcouz i want to connect it with kies