After CyanogenMod 9 RC1, we now have the RC2 release. This means, the final CM9 is just a few days away and will be released soon for everyone to have a stock Android experience on the big screen of the Galaxy Note N7000 with ICS Android 4.0.4.
Do you have a Galaxy Note and want to experience the stock Android, but with tons and tons of built-in functions you will not find anywhere in the other ROMs? Well, I suggest you stop reading and continue below to the actual tutorial to see what CM9 RC2 has in store for Galaxy Note.
Disclaimer: All the tools, mods or ROMs mentioned below belong to their respective owners/developers. We (TeamAndroid.com) or the developers are not to be held responsible if you damage or brick your device. We don’t have you on gun point to try out this tutorial 😉
Make sure you have installed all your USB drivers for the Samsung Galaxy Note to connect it with the computer. Download Galaxy Note USB drivers! Apart from just the USB drivers, there are a few more things that you need to take care of.
1. You need to enable USB debugging mode. This helps to connect your Android phone with the PC. See here: How to Enable USB Debugging.
2. Your phone battery should be 80-85% charged. If your phone goes off suddenly because of battery, during flashing ROMs or installing mods and updates — your phone might go dead permanently. See here: How to Check Battery Percentage.
3. Backup all your important data that you might need as soon as your flash a new ROM, or make a backup for just in case, you never know when anything might go wrong. See below on how to backup data:
- Backup your SMS messages. How? –> How to Backup/Restore SMS Messages.
- Backup Contacts, Gmail and Google Data. How? –> Sync with Google Sync.
- Backup Call History. How? –> How to Backup Call History.
- Backup WhatsApp Messages. How? –> How to Backup/Restore WhatsApp Messages.
- Backup APN Settings: GPRS, 3G, MMS Settings.
4. Your phone should be factory unlocked. Additional instructions for locked Android devices will be added in the tutorial for unlocking devices.
Now, let’s proceed with the tutorial below and update Galaxy Note N7000 to CM9 RC2.
HOW TO: Install CM9 RC2 on Samsung Galaxy Note N7000
We have put together a detailed step-by-step instructions guide on how to install CM9 RC2 on Galaxy Note N7000. If you are used to installing custom ROMs on your Galaxy Note N7000, then this should not be any different for you.
However, for beginners, you need to root your Samsung Galaxy Note and install a custom recovery. Please Google that up if you are unsure. Make sure you read the tutorial before performing it on your device.
- This tutorial is only for installing CM9 RC2 on Samsung Galaxy Note N7000. Please do not try on any other Galaxy Note variants.
- Your phone SHOULD be rooted.
- This tutorial will wipe out all your data. Proceed at your own risk.
- Perform a Dalvik Cache wipe before proceeding from the recovery mode.
- Samsung KIES will NOT detect your phone after installing CM9 RC2 because it is a custom ROM.
- ClockworkMod recovery should be installed from before.
- Make sure you backup all your data in your phone before proceeding.
Complete Step-By-Step Instructions:
Step 1 – Download CM9 RC2 (cm-9.0.0-RC2-n7000.zip) for Galaxy Note to your computer.
Step 2 – Connect and mount your Galaxy Note USB memory on your computer using the USB cable.
Step 3 – Now copy/paste the downloaded cm-9.0.0-RC2-n7000.zip file to your SD card. Make sure the file is in the SD card root (not in any folder).
Step 4 – Then turn off your phone and disconnect from the USB cable.
Step 5 – Now to get in the recovery mode. Switch on the phone while pressing and holding Volume Up + Home + Power buttons together.
Step 6 – In ClockworkMod recovery, wipe data first. Then perform a full data wipe first. Then scroll down to “flash zip from SD card” and press the power button to select it.
Step 7 – Press the power button again and select “choose zip from sdcard”.
Step 8 –Now using your volume keys, navigate to the cm-9.0.0-RC2-n7000.zip file that you copied to your SD card and select it using the power button. Confirm the installation on the next screen and the installation procedure should start now.
Step 9 – After the installation completes, go to “+++++Go Back” and reboot the phone by selecting “reboot system now” from the recovery menu. The phone will boot now and it might take about 5 minutes to boot on your first time. So, please wait.
That’s it! Your Galaxy Note should now have CM9 RC2 installed on your phone! Go to Settings >About phone to verify.