Tips & Tutorials

Root Samsung Galaxy Ace S5830 on Android 2.3.6 DDKQ8 Gingerbread Firmware

Samsung Galaxy Ace is one of Samsung’s low-end Android phones with minimal features and was launched with Android 2.2 Froyo. Later on, Samsung released Androdi 2.3 Gingerbread as well. You can now root Galaxy Ace on Android 2.3.6 DDKQ8.

In this tutorial, we will tell you how to root Android 2.3.6 DDKQ8 firmware on Galaxy Ace S5830 with complete steps. We are sure you will have no problems performing it. Please make sure you read the complete tutorial before actually performing it. Go to Settings > About phone to make sure you are on the required firmware: Android 2.3.6 build DDKQ8.

Disclaimer: All the tools, mods or ROMs mentioned below belong to their respective owners/developers. We ( or the developers are not to be held responsible if you damage or brick your device. We don’t have you on gun point to try out this tutorial 😉

Make sure you have installed all your USB drivers for the Samsung Galaxy Ace to connect it with the computer. Download Samsung Galaxy Ace USB drivers! Apart from just the USB drivers, there are a few more things that you need to take care of.

1. You need to enable USB debugging mode. This helps to connect your Android phone with the PC. See here: How to Enable USB Debugging.

2. Your phone battery should be 80-85% charged. If your phone goes off suddenly because of battery, during flashing ROMs or installing mods and updates — your phone might go dead permanently. See here: How to Check Battery Percentage.

3. Backup all your important data that you might need as soon as your flash a new ROM, or make a backup for just in case, you never know when anything might go wrong. See below on how to backup data:

4. Your phone should be factory unlocked. Additional instructions for locked Android devices will be added in the tutorial for unlocking devices.

Now, let’s proceed with the tutorial on the next page and root Galaxy Ace S5830 on the latest Android 2.3 Gingerbread ROM.